lkml.org 
[lkml]   [1999]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subject220pre6: Sound, Memory detection w/ GUS PnP
From
Date

Hi!


While looking through the output of dmesg I found the following:
---
Sound initialization started
Interwave: Can't use all installed RAM. ***
Interwave: Try reordering SIMMS.
Interwave: Can't find working DRAM encoding. ***
Interwave: Defaulting to 256k. Try reordering SIMMS. ***
<GUS PnP (IWave)> at 0x32c dma 7,6
<Gravis UltraSound PnP (256k)> at 0x220 irq 15 dma 6,7
Sound initialization complete
---
The mysterious lines are marked. What does this mean? I have 8MB installed on
my GUS. It seems that only 256K are used ?! What happens to the rest?

cat /dev/sndstat produces:
---
OSS/Free:3.8s2++-971130
Load type: Driver compiled into kernel
Kernel: Linux solfire 2.2.0-pre6 #1 Sun Jan 10 07:38:26 1999 i586
Config options: 0

Installed drivers:
Type 4: Gravis Ultrasound
Type 25: GUS PnP
Type 37: Loopback MIDI Device

Card config:
Gravis Ultrasound at 0x220 irq 15 drq 6,7
Loopback MIDI Device drq 0

Audio devices:
0: GUS PnP (IWave) (DUPLEX)
1: Ultrasound

Synth devices:
0: Gravis UltraSound PnP (256k)

Midi devices:
0: Gravis UltraSound Midi
1: Loopback MIDI Port 1
2: Loopback MIDI Port 2

Timers:
0: System clock

Mixers:
0: GUS PnP (IWave)
1: Gravis Ultrasound
---

KEEP HACKING!
Meino

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.031 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site