Messages in this thread | | | From | Matt Aubury <> | Subject | Re: ne2k-pci problem with 2.0.36 - eth0: timeout waiting for Tx RDC. | Date | Fri, 1 Jan 1999 12:06:31 +0000 (GMT) |
| |
> The network card is a NE2000 PCI and works great when using Windoze98 in > linux it does not work at all and it keeps crying "eth0: timeout waiting > for Tx RDC." about 1 time in 2 seconds.... The driver is compiled into the > kernel... > The same netcard works perfect with 2.0.34 on the same machine ...!!??@!?!?@
[snip]
> ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html > ne2l-pci.c: PCI NE2000 clone 'Via 82C926' at I/O 0xe400, IRQ 9. > eth0: PCI NE2000 found at 0xe400, IRQ 9, 08:00:31:00:38:C9
I had the same problem with a similar clone (I was about to replace the card, which after all had cost less than the cable which connects it to the wall). I fixed it (after some fiddling around) simply by undef'ing USE_LONGIO in drivers/net/ne2k-pci.c.
This almost certainly isn't the right thing to do; but it worked and I forgot about it -- I know I should have reported this before!
Cheers, Matt Aubury
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |