lkml.org 
[lkml]   [1998]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectEtherWORKS205(net profiler?) panics while booting 2.1.91pre1
Am I doing something wrong here? The bootup messages is pretty much the
same between 2.1.90 and 2.1.91 pre1 above this(look in the file
bootup-2.1.91pre1 attached) so if you need info about how it looks there
check the bootup-2.1.90 file attached.

configuration file available if needed, as always;).

I had no problems by the way this time when i tried to compile the 2.1.91
pre1 kernel(2.1.91 pre1 patched from 2.1.90 instead of patching all the
way from 2.1.88)

Has anyone touched the Etherworks files since 2.1.90?

I realy dont have any use of the Ethernet card right now, however its nice
to have it compiled in IF the case would ever arise that i would like to
have it there.

Hhhmm, i think i found something. however im not sure if this is it:

CONFIG_NET_PROFILE=y

That was in my .config file, however, im not sure if this was there
before. Can this be the reason im having troubles while booting?

BTW, i'm not finding anything from these hangups in the logs afterwards,
all of the 2.1.91 pre1 bootup was written by hand so there might be faults
in it but i highly doubt it as i doublechecked pretty much what i wrote
down.

--------------------------------------------------------------------------------
http://blueflux.home.ml.org
--------------------------------------------------------------------------------
She dresses in white but her heart's as black as sin
Her legs are wrapped around me, feel her crawl across my skin
As she sucks the life out of me, I cant fly any more
And I shiver and I shudder and surrender to the Whore.

-The Mission, Spider and the Fly
--------------------------------------------------------------------------------
-BlueFlux
Checking 'hlt' instruction... Ok.
POSIX conformance testing by UNIFIX
CPU0: Cyrix 5x86 3x Core/Bus Clock stepping 13
SMP motherboard not detected. Using dummy APIC emulation.
Starting kswapd v 1.5
parport0: PC-style at 0x3bc [SPP,PS2]
Serial driver version 4.24 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PS/2 auxiliary pointing device detected -- driver installed.
Real Time Clock Driver v1.09
<Sound Blaster 16 (4.13)> at 0x220 irq 5 dma 1,5
<Sound Blaster 16> at 0x330 irq 5 dma 0
js0: 2-axis joystick at 0x201
js1: 2-axis joystick at 0x201
Linux video capture interface: v0.01 ALPHA
Uniform CD-ROM driver Revision: 2.12
hda: Maxtor 7850 AV, ATA DISK drive
hdb: CD-ROM CDR-S1, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: Maxtor 7850 AV, 814MB w/64kB Cache, CHS=827/32/63
hdb: ATAPI 4X CDROM drive, 128kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
eth0: DE205-AB at 0x300, h/w address 08:00:2b:96:32:d0,
has a 2k RAM window at 0xd0000, but incorrect IRQ line detected.
Partition check:
hda: hda1 hda2 < hda5 hda6 >
VFS: Mounted root (ext2 filesystem) readonly.
Starting kmod
Freeing unused kernel memory: 40k freed
INIT: version 2.69 booting

hda: Maxtor 7850 AV, 814MB w/64kB Cache CHS=827/32/63
hdb: CD-ROM 4X CDROM drive, 128kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
early initialization of device whitehole is deferred
Evaluating net profiler cost ...<0>Kernel panic: Sorry, you CPU does not
support tsc. I am dying...
\
 
 \ /
  Last update: 2005-03-22 13:41    [W:0.020 / U:2.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site