Messages in this thread | | | Date | Mon, 23 Mar 1998 10:12:44 -0600 (CST) | From | Jeffrey Hundstad <> | Subject | complete lockup 2.1.90 SMP |
| |
After a reboot with a minimal system I can type about 5 keystrokes before the machine locks up completely. Pings don't even get returned. 2.1.85 works fine on this computer. I tried gcc-2.7.2.3 gcc-2.8.1, and pgcc latest snapshot.
Here's my boot log and configuration.
Loaded 4524 symbols from /usr/src/linux/System.map. Symbols match kernel version. Linux version 2.1.90 (root@pike) (gcc version 2.7.2.3) #1 Thu Mar 19 10:31:31 CST 1998 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: 440FX APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 17 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 INIT IRQ Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) PCI: BIOS32 Service Directory structure at 0xc00f9a30 PCI: BIOS32 Service Directory entry at 0xfd7da PCI: PCI BIOS revision 2.10 entry at 0xfd9d6 Probing PCI hardware. PCI->APIC IRQ transform: (B0,I0,P-1) -> -1 PCI->APIC IRQ transform: (B0,I7,P-1) -> -1 PCI->APIC IRQ transform: (B0,I7,P-1) -> -1 PCI->APIC IRQ transform: (B0,I15,P0) -> -1 PCI->APIC IRQ transform: (B0,I16,P0) -> -1 PCI->APIC IRQ transform: (B0,I17,P0) -> -1 Calibrating delay loop... 199.07 BogoMIPS Memory: 128220k/131072k available (696k kernel code, 400k reserved, 1732k data, 24k init) Swansea University Computer Society NET3.039 for Linux 2.1 NET3: Unix domain sockets 0.16 for Linux NET3.038. Swansea University Computer Society TCP/IP for NET3.037 IP Protocols: ICMP, UDP, TCP Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. POSIX conformance testing by UNIFIX CPU1: Intel Pentium Pro stepping 09 calibrating APIC timer ... ..... CPU clock speed is 199.3158 MHz. ..... APIC bus clock speed is 66.4384 MHz. Booting processor 0 eip 2000: Calibrating delay loop... 199.07 BogoMIPS OK. CPU0: Intel Pentium Pro stepping 09 Total of 2 processors activated (398.13 BogoMIPS). mapping IO APIC from standard address. new virtual address: c8802000. enabling Symmetric IO mode ... ...done. ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC pin 0, 16disabling PIRQ1 disabling PIRQ2 disabling PIRQ3 , 20, 21, 22, 23 not connected. nr of MP irq sources: 19. nr of IOAPIC registers: 24. testing the IO APIC....................... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 0FF 0F 0 0 0 0 0 1 1 59 02 0FF 0F 0 0 0 0 0 1 1 51 03 0FF 0F 0 0 0 0 0 1 1 69 04 0FF 0F 0 0 0 0 0 1 1 71 05 0FF 0F 0 0 0 0 0 1 1 79 06 0FF 0F 0 0 0 0 0 1 1 81 07 0FF 0F 0 0 0 0 0 1 1 89 08 0FF 0F 0 0 0 0 0 1 1 91 09 0FF 0F 0 0 0 0 0 1 1 99 0a 0FF 0F 0 0 0 0 0 1 1 A1 0b 0FF 0F 0 0 0 0 0 1 1 A9 0c 0FF 0F 0 0 0 0 0 1 1 B1 0d 000 00 1 0 0 0 0 0 0 00 0e 0FF 0F 0 0 0 0 0 1 1 C1 0f 0FF 0F 0 0 0 0 0 1 1 C9 10 000 00 1 0 0 0 0 0 0 00 11 0FF 0F 0 1 0 1 0 1 1 D9 12 0FF 0F 0 1 0 1 0 1 1 E1 13 0FF 0F 0 1 0 1 0 1 1 E9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 .................................... done. Starting kswapd v 1.5 Uniform CD-ROM driver Revision: 2.12 PCI->APIC IRQ transform: (B0,I15,P0) -> 19 aic7xxx: <Adaptec AHA-294X Ultra SCSI host adapter> at PCI 15 aic7xxx: BIOS enabled, IO Port 0xf400, IO Mem 0xf0def000, IRQ 19, Revision C aic7xxx: Wide Channel, SCSI ID 7, 16/255 SCBs, QFull 16, QMask 0x1f scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.1/3.2 scsi : 1 host. scsi0: Scanning channel A for devices. Vendor: QUANTUM Model: VIKING 4.5 WSE Rev: 880R Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: iomega Model: jaz 1GB Rev: J.86 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi removable disk sdb at scsi0, channel 0, id 5, lun 0 Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 scsi : detected 2 SCSI disks total. SCSI device sda: hdwr sector= 512 bytes. Sectors= 8899737 [4345 MB] [4.3 GB] sdb : READ CAPACITY failed. sdb : status = 1, message = 00, host = 0, driver = 28 sdb : extended sense code = 2 sdb : block size assumed to be 512 bytes, disk size 1GB. PCI->APIC IRQ transform: (B0,I16,P0) -> 18 eth0: 3Com 3c905 Boomerang 100baseTx at 0xecc0, 00:60:08:5c:52:b1, IRQ 18 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. eth0: MII transceiver found at address 24. Enabling bus-master transmits and whole-frame receives. 3c59x.c:v0.47H 12/4/97 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html Partition check: sda: sda1 sda2 sda3 sda4 sdb:scsidisk I/O error: dev 08:10, sector 0 unable to read partition table VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 24k freed Adding Swap: 130748k swap-space (priority -1)
# # Automatically generated by make menuconfig: don't edit #
# # Code maturity level options # CONFIG_EXPERIMENTAL=y
# # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set CONFIG_M686=y # CONFIG_MATH_EMULATION is not set CONFIG_MAX_MEMSIZE=1024
# # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set # CONFIG_KMOD is not set
# # General setup # CONFIG_NET=y CONFIG_PCI=y CONFIG_PCI_BIOS=y # CONFIG_PCI_DIRECT is not set CONFIG_PCI_OPTIMIZE=y CONFIG_PCI_OLD_PROC=y # CONFIG_MCA is not set CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_BINFMT_JAVA is not set # CONFIG_VIDEO_SELECT is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_OTHER is not set
# # Plug and Play support # # CONFIG_PNP is not set
# # Floppy, IDE, and other block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_DEV_IDE is not set # CONFIG_BLK_DEV_HD_ONLY is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_MD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_XD is not set CONFIG_PARIDE_PARPORT=m # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_HD is not set
# # Networking options # CONFIG_PACKET=y # CONFIG_NETLINK is not set # CONFIG_FIREWALL is not set # CONFIG_NET_ALIAS is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_IP_ACCT is not set # CONFIG_IP_ROUTER is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_ALIAS is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_RARP is not set CONFIG_IP_NOSR=y CONFIG_SKB_LARGE=y # CONFIG_IPV6 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_BRIDGE is not set # CONFIG_LLC is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # CONFIG_CPU_IS_SLOW is not set # CONFIG_NET_SCHED is not set # CONFIG_NET_PROFILE is not set
# # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set
# # SCSI low-level drivers # # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_TAGGED_QUEUEING=y # CONFIG_OVERRIDE_CMDS is not set CONFIG_AIC7XXX_PAGE_ENABLE=y # CONFIG_AIC7XXX_PROC_STATS is not set CONFIG_AIC7XXX_RESET_DELAY=15 # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_DEBUG is not set
# # Network device support # CONFIG_NETDEVICES=y # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_EQUALIZER is not set CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set CONFIG_VORTEX=y # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_NET_ISA is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set # CONFIG_FDDI is not set # CONFIG_DLCI is not set CONFIG_PLIP=m CONFIG_PPP=m CONFIG_SLIP=m # CONFIG_SLIP_COMPRESSED is not set # CONFIG_SLIP_SMART is not set # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_NET_RADIO is not set # CONFIG_TR is not set # CONFIG_SHAPER is not set
# # Amateur Radio support # # CONFIG_HAMRADIO is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # CD-ROM drivers (not for SCSI or IDE/ATAPI drives) # # CONFIG_CD_NO_IDESCSI is not set CONFIG_CDROM=y
# # Filesystems # # CONFIG_QUOTA is not set # CONFIG_MINIX_FS is not set CONFIG_EXT2_FS=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=m CONFIG_PROC_FS=y CONFIG_NFS_FS=m CONFIG_NFSD=m CONFIG_SUNRPC=m CONFIG_LOCKD=m # CONFIG_CODA_FS is not set CONFIG_SMB_FS=m CONFIG_SMB_WIN95=y # CONFIG_HPFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_AUTOFS_FS is not set # CONFIG_UFS_FS is not set # CONFIG_ADFS_FS is not set # CONFIG_MAC_PARTITION is not set CONFIG_NLS=y
# # Native Language Support # # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_KOI8_R is not set
# # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=m # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_PRINTER=m CONFIG_PRINTER_READBACK=y CONFIG_MOUSE=y # CONFIG_ATIXL_BUSMOUSE is not set # CONFIG_BUSMOUSE is not set # CONFIG_MS_BUSMOUSE is not set CONFIG_PSMOUSE=m # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_UMISC is not set # CONFIG_QIC02_TAPE is not set # CONFIG_APM is not set # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set # CONFIG_VIDEO_DEV is not set # CONFIG_NVRAM is not set # CONFIG_JOYSTICK is not set # CONFIG_MISC_RADIO is not set
# # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set
# # Sound # CONFIG_SOUND=m # CONFIG_PAS is not set CONFIG_SB=m CONFIG_ADLIB=m # CONFIG_GUS is not set # CONFIG_MPU401 is not set # CONFIG_PSS is not set # CONFIG_MSS is not set # CONFIG_SSCAPE is not set # CONFIG_TRIX is not set # CONFIG_MAD16 is not set # CONFIG_CS4232 is not set # CONFIG_MAUI is not set # CONFIG_OPL3SA1 is not set # CONFIG_SOFTOSS is not set CONFIG_YM3812=m # CONFIG_VMIDI is not set # CONFIG_UART6850 is not set # CONFIG_LOWLEVEL_SOUND is not set
# # Kernel hacking # # CONFIG_PROFILE is not set # CONFIG_MAGIC_SYSRQ is not set CONFIG_VGA_CONSOLE=y
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu
| |