lkml.org 
[lkml]   [1998]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectapm-bios and rtc
I finally got apm_bios to blank my screen with no error msgs.
In apm_bios.c, I set APM_SET_DISPLAY_POWER_STATE "b" to 0x0100 instead
of 0x01ff.
The screen backlight would go off, but then come back on in about 1 min.
After many printk's I disabled rtc support in the kernel. That did the
trick.
Still does not work with X, but that is another problem.
I also noticed in console.c that apm screen blanking is called if
CONFIG_APM is set. Shouldn't this be ifdef CONFIG_APM_DISPLAY_BLANK ?
Auto suspend also works.
APM bios V1.0 (Driver version 1.3), linux 2.1.88, PCMCIA-cs v3.0.0
MidWestMicro Elite Soundbook DX2/66
--
Garst

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu

\
 
 \ /
  Last update: 2005-03-22 13:41    [W:0.028 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site