lkml.org 
[lkml]   [1997]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Two Video Adapters - disable one?
Date
Tethys <tethys@ml.com> writes:
>
> My two cgsix adapters seem to work fine under Linux/Sparc :-) On the
> PC, I've always been led to believe that the hardware couldn't support
> multiple VGA cards. You can have a VGA and an MDA card, though. Recently,
> some manufacturers have been making cards that allow you to use more
> than one simultaneously. The Matrox Millenium springs to mind (we have

The problem is that all these cards insist on using their VGA-compatible
I/O addresses when booting, with no way to turn the nonsense off, even
though most chipsets allegedly support that. :-(

> 2 or 3 in our PCs at work). I don't think you can mix and match with
> other cards, though.
>
That depends on their VGA BIOS. If it finds the 'other' card (it better be
in another PCI slot) and disables its own VGA register set correctly, it
should work. That's a big "if", obviously.

--
Babies do it in their pants.
--
Matthias Urlichs \ noris network GmbH / Xlink-POP Nürnberg
Schleiermacherstraße 12 \ Linux+Internet / EMail: urlichs@noris.de
90491 Nürnberg (Germany) \ Consulting+Programming+Networking+etc'ing
PGP: 1024/4F578875 1B 89 E2 1C 43 EA 80 44 15 D2 29 CF C6 C7 E0 DE
Click <A HREF="http://info.noris.de/~smurf/finger">here</A>. 42

\
 
 \ /
  Last update: 2005-03-22 13:39    [W:0.046 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site