lkml.org 
[lkml]   [1996]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject1.99.14 & duplicate NE2000 (fwd)
Date

Does anyone lese understand what the problem is? :)

> happens with 1.99.14:
>
> kernel = monolithic, nearly every software compiled in. however, from a
> previous compile, there are still /lib/modules/1.99.14/* left over
>
> at booting, a NE2000 (the only network-card in the system!) is reported as:
>
> > ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
> > NE*000 ethercard probe at 0x340: 00 00 e8 c6 d1 1f
> > eth0: NE2000 found at 0x340, using IRQ 15.
>

Ok, so that card has been installed and running....

> quite fine. /proc/interrupts and /proc/ioports read as follows:
>
> 0: 16970 timer
> 1: 196 keyboard
> 2: 0 cascade
> 9: 1820 + aic7xxx
> 13: 1 math error
> 14: 76 + ide0
> 15: 634 NE2000
> ^^^^^^^^^^^^^^^^^^^^^
>
> this is fine, since I don't have a 2nd IDE.
>
> 02f8-02ff : serial(auto)
> 0340-035f : NE2000
> ^^^^^^^^^^^^^^^^^^
>
> okay so far!
>
> now I go on, and type
>
> insmod /lib/modules/1.99.14./net/8390.o
> insmod /lib/modules/1.99.14./net/ne.o io=0x340
> ^^^^^^^^


Huh!? Why are you loading this driver when the driver was already loaded
at boot time?

>
> this is of course not correct. 0x340 is already being used by eth0.
> however, eth1 is detected:
>

I thought you said you only had one eth card?

This doesnt make any sense!

_S


\
 
 \ /
  Last update: 2005-03-22 13:37    [W:0.033 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site