lkml.org 
[lkml]   [1996]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: mcdx.c (1.3.93) + Audio Player Workman = system freezes
From
> [...]
> Finally I'm using a single speed drive, but in the weekend I got
> also hands on an leased doublespeed :-). All problems seems to be gone now.
> The driver is now thoroughly tested on FX001-D,M and F drives.
> Therefore I will put an corrected version, mcdx-2.2 into sunsite/incomming
> tomorrow.

This works nearly perfect. Workman and CD-ROMs work without any problems so
far, but workbone behaves a bit strange. When I start workbone for the first
time after having changed CDs, it takes very long (about a minute) until
workbone is ready. This seems to be caused by ioctl(CDROMREADTOCENTRY) which
is rather slow when called for the first time. If I remeber correctly, this
problem didn't exist in the old mcd-driver (but I play audio-CDs only
occasionally on this drive, so I'm not really sure).

And BTW, there's a strange printk() in mcdx_init (the one with
MCDX_NDRIVES), but I guess you already know this.

Thanks for making mcdx usable!

Martin
--
/* Martin Buck E-Mail: martin-2.buck@student.uni-ulm.de */
/* Student of electrical engineering WWW: http://www.uni-ulm.de/~s_mbuck1/ */
/* University of Ulm, Germany Snail-Mail: Paukengasse 2, 89077 Ulm, Germany */
#include <disclaimer.h> /* PGP Key available MIME-Mail welcome */


\
 
 \ /
  Last update: 2005-03-22 13:37    [W:0.024 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site