Messages in this thread | | | Date | Tue, 09 Apr 1996 21:11:51 +0200 | From | Christian Jönsson FOA 72 <> | Subject | Cannot boot linux |
| |
I compiled the 1.3.85 kernel today and I can no longer boot any linux kernel.
In the config I did, by mistake, include some CD-ROM stuff I shouldn't have. I do not have any CD-ROM device at all, to bad.
When booting (several) linux 1.3.x kernel i get:
Unable to identify CD-ROM format. Warning: dev(04:c1) tty->count(2) != fd's(17) in tty_open Warning: dev(04:c1) tty->count(2) != fd's(17) in release_dev Warning: dev(04:c1) tty->count(2) != fd's(17) in tty_open Warning: dev(04:c1) tty->count(2) != fd's(17) in release_dev
and so on. Actually, several different numbers show up, not just 17.
When booting the 1.2.13 kernel I have I get:
Unable to identify CD-ROM format. end_request: I/O error, dev 2100, sector 64 isofs_read_super: bread failed, dev 0x2100 iso_blknum 16
*and* I can't issue a shutdown (ctrl-alt-delete).
What can I do to be able to boot again?
I have a symbolic link /usr/src/linux -> /usr/src/linux-1.3.85. Maybe, if I could delete this link and make a new one /usr/src/linux -> /usr/src/linux-1.3.80 and try booting again it would jump off. But how can I do such a thing when I can't boot *any* linux kernel?
Well, if you have *any* suggestions, please let me know. I really hate to use WfW...
TIA # # Automatically generated make config: don't edit #
# # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set # CONFIG_KERNELD is not set
# # General setup # # CONFIG_MATH_EMULATION is not set CONFIG_NET=y # CONFIG_MAX_16M is not set # CONFIG_PCI is not set CONFIG_SYSVIPC=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_KERNEL_ELF=y CONFIG_M586=y
# # Floppy, IDE, and other block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_IDE=y
# # Please see drivers/block/README.ide for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDE_PCMCIA=y # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_MD is not set
# # Networking options # # CONFIG_FIREWALL is not set # CONFIG_NET_ALIAS is not set CONFIG_INET=y # CONFIG_IP_FORWARD is not set # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ACCT is not set
# # (it is safe to leave these untouched) # # CONFIG_INET_PCTCP is not set # CONFIG_INET_RARP is not set # CONFIG_NO_PATH_MTU_DISCOVERY is not set # CONFIG_TCP_NAGLE_OFF is not set CONFIG_IP_NOSR=y CONFIG_SKB_LARGE=y
# # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_AX25 is not set # CONFIG_NETLINK is not set
# # SCSI support # CONFIG_SCSI=y
# # SCSI support type (disk, tape, CDrom) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_CHR_DEV_SG is not set
# # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_AUTO_BIOSP=y
# # SCSI low-level drivers # # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC is not set CONFIG_SCSI_SEAGATE=y # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_PPA=y # CONFIG_SCSI_AM53C974 is not set
# # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_SLIP is not set # CONFIG_PPP is not set # CONFIG_STRIP is not set # CONFIG_SCC is not set # CONFIG_PLIP is not set # CONFIG_EQUALIZER is not set # CONFIG_DLCI is not set CONFIG_NET_ALPHA=y CONFIG_NET_VENDOR_SMC=y # CONFIG_WD80x3 is not set # CONFIG_ULTRA is not set CONFIG_SMC9194=y # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_ISA is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set # CONFIG_TR is not set # CONFIG_ARCNET is not set
# # ISDN subsystem # # CONFIG_ISDN is not set
# # CD-ROM drivers (not for SCSI or IDE/ATAPI drives) # # CONFIG_CD_NO_IDESCSI is not set
# # Filesystems # # CONFIG_QUOTA is not set CONFIG_MINIX_FS=y # CONFIG_EXT_FS is not set CONFIG_EXT2_FS=y # CONFIG_XIA_FS is not set CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y # CONFIG_VFAT_FS is not set # CONFIG_UMSDOS_FS is not set CONFIG_PROC_FS=y CONFIG_NFS_FS=y # CONFIG_ROOT_NFS is not set # CONFIG_SMB_FS is not set CONFIG_ISO9660_FS=y # CONFIG_HPFS_FS is not set # CONFIG_SYSV_FS is not set
# # Character devices # CONFIG_SERIAL=y # CONFIG_DIGI is not set # CONFIG_CYCLADES is not set # CONFIG_STALDRV is not set # CONFIG_PRINTER is not set # CONFIG_BUSMOUSE is not set CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_MS_BUSMOUSE is not set # CONFIG_ATIXL_BUSMOUSE is not set # CONFIG_UMISC is not set # CONFIG_QIC02_TAPE is not set # CONFIG_FTAPE is not set CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_WATCHDOG is not set
# # Sound # # CONFIG_SOUND is not set
# # Kernel hacking # # CONFIG_PROFILE is not set --- Christian Jönsson chj@lin.foa.se Nat. Def. Res. Est., Sweden Dept. of CC Warfare Tech. +46 13 31 81 05
| |