lkml.org 
[lkml]   [1996]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: CMD640 & ATAPI CD on hdc
In message "Re: CMD640 & ATAPI CD on hdc", 
'phil@tazenda.demon.co.uk' writes:

>I am also having trouble (with 1.3.85) with my CD-ROM on the secondary
>interface not being detected properly; I get 'hdc: IRQ probe failed (0)'.
>I have a CMD640 on the PCI bus. The problem seems to be down to the new
>version of cmd640.c (0.10, don't know when it was introduced) which
>doesn't reset the secondary port. I'm not sure why this change was made.
>If I boot into DOS, let it initialise the CD-ROM, and then soft-reboot
>into Linux, it works.

To do anything about this, I need to see the full boot-up trace
from the kernel.

-ml



\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.120 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site