Messages in this thread | | | From | Alex Pikus <> | Subject | RE: I try BusLogic driver 1.3.2, ( in 1.3.9[12].) | Date | Tue, 23 Apr 1996 11:31:19 -0500 |
| |
Is there the new Bus Logic driver patch for 1.3.7x? and 1.2.1x?
Thanks!
Alex.
PS. Does it support Synch Tx of 20mb on bt-956c?
---------- From: Michael B Herf[SMTP:herf+@cmu.edu] Sent: Sunday, April 21, 1996 10:06 AM To: linux-kernel@vger.rutgers.edu Cc: linux-kernel@vger.rutgers.edu Subject: Re: I try BusLogic driver 1.3.2, ( in 1.3.9[12].)
Excerpts from internet.computing.linux-kernel: 21-Apr-96 Re: I try BusLogic driver 1.. by "Leonard N. Zubkoff"@dan > If we get further reports of problems with this model disk, it should probably > be blacklisted then. >
I'm having a slightly different problem. The problem arose when I added a new CD-ROM, the Toshiba XM-5401. I do have a Quantum Empire 1080S, but I've never had any problems with it. The setup is this:
[internal term]-[Quantum 1080S] <-> [Toshiba 5401] <-> [DEC 5400S] <-> [bt946] <-> [Conner CTMS3200]-[external term]
Here's the startup of Leonard's driver:
--------
Apr 21 14:16:16 vivarin kernel: scsi0: Firmware Version: 4.22, I/O Address: 0x334, IRQ Channel: 15/Level Apr 21 14:16:16 vivarin kernel: scsi0: DMA Channel: None, BIOS Address: 0xDC000, Host Adapter SCSI ID: 7 Apr 21 14:16:16 vivarin kernel: scsi0: Scatter/Gather Limit: 8192 segments, Synchronous Initiation: Enabled Apr 21 14:16:16 vivarin kernel: scsi0: SCSI Parity Checking: Enabled, Extended Disk Translation: Enabled Apr 21 14:16:16 vivarin kernel: scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled Apr 21 14:16:16 vivarin kernel: scsi0: Error Recovery: Default, Mailboxes: 64, Initial CCBs: 32 Apr 21 14:16:16 vivarin kernel: scsi0: Driver Scatter/Gather Limit: 128 segments, Concurrency: 7 Apr 21 14:16:16 vivarin kernel: scsi0: *** BusLogic BT-946C Initialized Successfully *** Apr 21 14:16:16 vivarin kernel: scsi0: Target 0: Synchronous at 10.0 mega-transfers/second, offset 15 Apr 21 14:16:16 vivarin kernel: scsi0: Target 1: Synchronous at 10.0 mega-transfers/second, offset 15 Apr 21 14:16:16 vivarin kernel: scsi0: Target 4: Synchronous at 4.55 mega-transfers/second, offset 15 Apr 21 14:16:16 vivarin kernel: scsi0: Target 5: Asynchronous Apr 21 14:16:16 vivarin kernel: scsi0 : BusLogic BT-946C
---------------------
And then the errors look like these:
Apr 19 23:21:02 vivarin kernel: SCSI host 0 abort (pid 35059) timed out - resetting Apr 19 23:21:02 vivarin kernel: SCSI bus is being reset for host 0. Apr 19 23:21:02 vivarin kernel: scsi0: Unable to Reset Command to Target 0 - Reset Pending Apr 19 23:21:02 vivarin kernel: scsi : aborting command due to timeout : pid 35063, scsi0, channel 0, id 1, lun 0 0x0a 14 00 57 02 00 Apr 19 23:21:02 vivarin kernel: scsi0: Unable to Abort CCB #35142 to Target 1 - Abort Tag Not Supported Apr 19 23:21:02 vivarin kernel: SCSI host 0 abort (pid 35063) timed out - resetting Apr 19 23:21:02 vivarin kernel: SCSI bus is being reset for host 0. Apr 19 23:21:02 vivarin kernel: scsi0: Resetting BusLogic BT-946C due to Target 1 Apr 19 23:21:02 vivarin kernel: scsi0: *** BusLogic BT-946C Initialized Successfully *** Apr 19 23:21:59 vivarin kernel: scsi0: Tagged Queuing now active for Target 1 Apr 19 23:35:01 vivarin kernel: scsi : aborting command due to timeout : pid 36507, scsi0, channel 0, id 1, lun 0 0x0a 04 27 2d f4 00 Apr 19 23:35:01 vivarin kernel: scsi0: Unable to Abort CCB #36604 to Target 1 - Abort Tag Not Supported Apr 19 23:35:01 vivarin kernel: scsi : aborting command due to timeout : pid 36508, scsi0, channel 0, id 1, lun 0 0x0a 04 28 21 f4 00 Apr 19 23:35:01 vivarin kernel: scsi0: Unable to Abort CCB #36605 to Target 1 - Abort Tag Not Supported Apr 19 23:35:01 vivarin kernel: scsi : aborting command due to timeout : pid 36509, scsi0, channel 0, id 1, lun 0 0x0a 04 29 15 f4 00 Apr 19 23:35:01 vivarin kernel: scsi0: Unable to Abort CCB #36606 to Target 1 - Abort Tag Not Supported Apr 19 23:35:01 vivarin kernel: scsi : aborting command due to timeout : pid 36510, scsi0, channel 0, id 1, lun 0 0x0a 04 2a 09 f4 00 Apr 19 23:35:01 vivarin kernel: scsi0: Unable to Abort CCB #36607 to Target 1 - Abort Tag Not Supported Apr 19 23:35:06 vivarin kernel: scsi : aborting command due to timeout : pid 36527, scsi0, channel 0, id 1, lun 0 0x0a 04 00 4f 02 00
------------
Eventually, it gets the bus reset, and things work for quite a while. I get these errors about once a day. Everything locks and you just have to wait for the kernel to reset the bus.
Actually, NT does the same thing, so I think it's probably a problem with the controller or one of the devices.
mike
| |