lkml.org 
[lkml]   [1996]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: signal(SIGFPE,SIG_IGN) causes endless loop
Date
From
albert@ccs.neu.edu wrote:

>OK, what about x86 OSs? This could affect iBCS a bit.

SVR4 x86 (Siemens Nixdorf Sinix 5.41B): endless loop

Excerpt from truss:
signal(SIGFPE, SIG_IGN) = SIG_DFL
Incurred fault #8, FLTIZDIV %pc = 0x08048446
siginfo: SIGFPE FPE_INTDIV addr=0x00000000
Received signal #8, SIGFPE [ignored]
siginfo: SIGFPE FPE_INTDIV addr=0x00000000
Incurred fault #8, FLTIZDIV %pc = 0x08048446
siginfo: SIGFPE FPE_INTDIV addr=0x00000000
Received signal #8, SIGFPE [ignored]
siginfo: SIGFPE FPE_INTDIV addr=0x00000000
[repeated ad nauseam]

Paul Slootman
--
Murphy Software, Enschede, The Netherlands There is no such thing
work: paul@wau.mis.ah.nl / paul@murphy.nl as a coincidence.
home: paul@wurtel.hobby.nl


\
 
 \ /
  Last update: 2005-03-22 13:37    [W:0.070 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site