Messages in this thread | | | From | Kevin Buettner <> | Subject | Diald doesn't work with 1.3.72 | Date | Sun, 10 Mar 1996 23:25:50 -0700 (MST) |
| |
I have been unable to get either diald-0.11 or diald-0.12 to work with linux kernel 1.3.72 (built with IP forwarding, firewalling, and masquerading). OTOH, diald-0.11 is working well with 1.3.70 and several earlier versions in the 1.3.X series (configured the same).
In 1.3.72, diald dials out properly and gets a connection, but I do not have any network connectivity (i.e, pings, telnets, etc. to favorite hosts don't work).
It appears that PPP is more or less working because I get network connectivity once I delete the default route and add it back in to go straight to the ppp device. (But diald still isn't very happy. It doesn't notice any of the packets being sent in either direction and eventually drops the connecton.)
FYI, "netstat -rn" yields the following:
Kernel routing table Destination Gateway Genmask Flags Metric Ref Use Iface 127.0.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 sl0 204.245.20.28 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 9 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 67 lo 0.0.0.0 127.0.0.2 0.0.0.0 UG 0 0 496 sl0
I am using the following command to start diald up in /etc/rc.d/rc.local:
/usr/sbin/diald /dev/cua1 -m ppp local 204.245.17.205 remote 127.0.0.2 \ defaultroute modem crtscts redial-timeout 7 \ connect /usr/sbin/chatter fifo /etc/diald/fifo \ -- asyncmap 0
Kevin
| |