Messages in this thread | | | From | Mirko Manea <> | Subject | PCI 3C90X eth card problem | Date | Tue, 05 Nov 1996 10:16:21 MET |
| |
I have some problem in make an EtherLink XL PCI 3C90X ethernet card work. My hardware is:
- Pentium 100 Chipset UMC - 16 Mb RAM, IDE HD 820Mb, IDE CDROM - A SMC-Ultra Ethernet card - A 3C90X Ethernet card
Here is 'cat /proc/pci' :
PCI devices found: Bus 0, device 18, function 0: Ethernet controller: 3Com Unknown device (rev 0). Vendor id=10b7. Device id=9001. Medium devsel. IRQ 10. Master Capable. Latency=32. Min Gnt=3.Max Lat=8. I/O at 0x6000. Bus 0, device 17, function 0: VGA compatible controller: S3 Inc. Trio32/Trio64 (rev 0). Medium devsel. IRQ 11. Non-prefetchable 32 bit memory at 0xe0000000. Bus 0, device 7, function 1: IDE interface: Intel 82371SB Natoma/Triton II PIIX3 (rev 0). Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. I/O at 0x9000. Bus 0, device 7, function 0: ISA bridge: Intel 82371SB Natoma/Triton II PIIX3 (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. Bus 0, device 0, function 0: Host bridge: Intel 82437VX Triton II (rev 1). Medium devsel. Master Capable. Latency=32.
I have tried with Linux 2.0.24, with the 3c509/3c579 support and with the 3c590 series (592/595/597) "Vortex" support, but till now I did not succed.
Thank you very much for any help, Mirko Manea <mami@arena.sci.univr.it>
| |