lkml.org 
[lkml]   [1996]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: Q: IrDA compliant drivers ?
Date



>I started doing something with this, but all I had were adaptec IRDA
>adapters, and they don't work like their manual says (and come up in a
>slow baud rate, and send breaks which linux doesn't like when I attempt
>to program them).
>
>tz@execpc.com
>finger tz@execpc.com for PGP key

I've got the two Thinkpads and two Adaptec AIRport2000s. I've had
problems with the AIRports too. I assumed they just sent serial, but
when I tried this TX seemed OK but with RX I found that the first
and/or second bits in each byte were sometimes set high (ie miss
the IR pulse)... Any ideas ?

Whilst adapting a driver to do the echo cancellation (and Collision
Avoidance) we may as well build in support for the 4Mbit/s DMA
style transfer.

No-one has commented about forming an 'IP over IR' alliance...

\
 
 \ /
  Last update: 2005-03-22 13:38    [W:0.033 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site