lkml.org 
[lkml]   [2024]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] dmaengine: fsl-edma: merge mcf-edma into fsl-edma driver
Date
MCF eDMA are almost the same as FSL eDMA driver. Previously link to two
kernel modules, fsl-edma.ko and mcf-edma.ko. These are not problem because
mcf-edma is for m68k ARCH and FSL eDMA is for arm/arm64 ARCH. But often
build both at PPC ARCH. It also makes sense to build two drivers at the
same time. It causes many build warning because share a fsl-edma-common.o.
such as:

powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-common.o' being placed in section `.stubs'
powerpc64le-linux-ld: warning: orphan section `.stubs' from `drivers/dma/fsl-edma-trace.o' being placed in section `.stubs'

Merge mcf-edma into fsl-edma driver. So use one driver (fsl-edma.ko) for
MCF and FSL eDMA.

mcf-edma.ko should be replaced by fsl-edma.ko in modules, minimizing user
space impact because MCF eDMA remains confined to legacy ColdFire mcf5441x
production and mcf5441x has been in production for at least a decade and
NXP has long ceased ColdFire development.

Update Kconfig to make MCF_EDMA as feature of FSL_EDMA and change Makefile
to link mcl-edma-main.o to fsl-edma.o.

Create a common module init/exit functions, which call original's
fsl-edma-init[exit]() and mcf-edma-init[exit]().

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405082029.Es9umH7n-lkp@intel.com/
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/dma/Kconfig | 8 ++++----
drivers/dma/Makefile | 5 ++---
drivers/dma/fsl-edma-common.c | 28 ++++++++++++++++++++++++++++
drivers/dma/fsl-edma-common.h | 5 +++++
drivers/dma/fsl-edma-main.c | 6 ++----
drivers/dma/mcf-edma-main.c | 6 ++----
6 files changed, 43 insertions(+), 15 deletions(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 002a5ec806207..45110520f6e68 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -393,14 +393,14 @@ config LS2X_APB_DMA
It does not support memory to memory data transfer.

config MCF_EDMA
- tristate "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
+ bool "Freescale eDMA engine support, ColdFire mcf5441x SoCs"
depends on M5441x || COMPILE_TEST
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
- Support the Freescale ColdFire eDMA engine, 64-channel
- implementation that performs complex data transfers with
- minimal intervention from a host processor.
+ Support the Freescale ColdFire eDMA engine in FSL_EDMA driver,
+ 64-channel implementation that performs complex data transfers
+ with minimal intervention from a host processor.
This module can be found on Freescale ColdFire mcf5441x SoCs.

config MILBEAUT_HDMAC
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 802ca916f05f5..0000922c7cbfe 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -33,11 +33,10 @@ obj-$(CONFIG_DW_EDMA) += dw-edma/
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
fsl-edma-trace-$(CONFIG_TRACING) := fsl-edma-trace.o
CFLAGS_fsl-edma-trace.o := -I$(src)
+mcf-edma-main-$(CONFIG_MCF_EDMA) := mcf-edma-main.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
-fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
+fsl-edma-objs := fsl-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y} ${mcf-edma-main-y}
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
-mcf-edma-objs := mcf-edma-main.o fsl-edma-common.o ${fsl-edma-trace-y}
-obj-$(CONFIG_MCF_EDMA) += mcf-edma.o
obj-$(CONFIG_FSL_QDMA) += fsl-qdma.o
obj-$(CONFIG_FSL_RAID) += fsl_raid.o
obj-$(CONFIG_HISI_DMA) += hisi_dma.o
diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
index 3af4307873157..ac04a2ce4fa1f 100644
--- a/drivers/dma/fsl-edma-common.c
+++ b/drivers/dma/fsl-edma-common.c
@@ -888,4 +888,32 @@ void fsl_edma_setup_regs(struct fsl_edma_engine *edma)
}
}

+static int __init fsl_edma_common_init(void)
+{
+ int ret;
+
+ ret = fsl_edma_init();
+ if (ret)
+ return ret;
+
+#ifdef CONFIG_MCF_EDMA
+ ret = mcf_edma_init();
+ if (ret)
+ return ret;
+#endif
+ return 0;
+}
+
+subsys_initcall(fsl_edma_common_init);
+
+static void __exit fsl_edma_common_exit(void)
+{
+ fsl_edma_exit();
+
+#ifdef CONFIG_MCF_EDMA
+ mcf_edma_exit();
+#endif
+}
+module_exit(fsl_edma_common_exit);
+
MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
index ac66222c16040..dfbdcc922ceea 100644
--- a/drivers/dma/fsl-edma-common.h
+++ b/drivers/dma/fsl-edma-common.h
@@ -488,4 +488,9 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan);
void fsl_edma_cleanup_vchan(struct dma_device *dmadev);
void fsl_edma_setup_regs(struct fsl_edma_engine *edma);

+int __init fsl_edma_init(void);
+void __exit fsl_edma_exit(void);
+int __init mcf_edma_init(void);
+void __exit mcf_edma_exit(void);
+
#endif /* _FSL_EDMA_COMMON_H_ */
diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
index 391e4f13dfeb0..a1c3c4ed869c5 100644
--- a/drivers/dma/fsl-edma-main.c
+++ b/drivers/dma/fsl-edma-main.c
@@ -724,17 +724,15 @@ static struct platform_driver fsl_edma_driver = {
.remove_new = fsl_edma_remove,
};

-static int __init fsl_edma_init(void)
+int __init fsl_edma_init(void)
{
return platform_driver_register(&fsl_edma_driver);
}
-subsys_initcall(fsl_edma_init);

-static void __exit fsl_edma_exit(void)
+void __exit fsl_edma_exit(void)
{
platform_driver_unregister(&fsl_edma_driver);
}
-module_exit(fsl_edma_exit);

MODULE_ALIAS("platform:fsl-edma");
MODULE_DESCRIPTION("Freescale eDMA engine driver");
diff --git a/drivers/dma/mcf-edma-main.c b/drivers/dma/mcf-edma-main.c
index 78c606f6d0026..d97991a1e9518 100644
--- a/drivers/dma/mcf-edma-main.c
+++ b/drivers/dma/mcf-edma-main.c
@@ -284,17 +284,15 @@ bool mcf_edma_filter_fn(struct dma_chan *chan, void *param)
}
EXPORT_SYMBOL(mcf_edma_filter_fn);

-static int __init mcf_edma_init(void)
+int __init mcf_edma_init(void)
{
return platform_driver_register(&mcf_edma_driver);
}
-subsys_initcall(mcf_edma_init);

-static void __exit mcf_edma_exit(void)
+void __exit mcf_edma_exit(void)
{
platform_driver_unregister(&mcf_edma_driver);
}
-module_exit(mcf_edma_exit);

MODULE_ALIAS("platform:mcf-edma");
MODULE_DESCRIPTION("Freescale eDMA engine driver, ColdFire family");
--
2.34.1

\
 
 \ /
  Last update: 2024-05-27 18:22    [W:0.088 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site