lkml.org 
[lkml]   [2024]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] soc: imx: secvio: Add secvio support
Date
The tampers are security feature available on i.MX products and
managed by SNVS block.The tamper goal is to detect the variation
of hardware or physical parameters, which can indicate an attack.

The SNVS, which provides secure non-volatile storage, allows to
detect some hardware attacks against the SoC.They are connected
to the security-violation ports, which send an alert when an
out-of-range value is detected.

This detection is done by:
-Analog tampers: measure analogic values
- External clock frequency.
- Temperature.
- Voltage.

- Digital tampers:
- External tamper
- Other detectors:
- Secure real-time counter rollover tamper.
- Monotonic counter rollover tamper.
- Power supply glitch tamper.

The on-chip sensors for voltage, temperature, and clock frequency
indicate if tamper scenarios may be present. These sensors generate an
out-of-range signal that causes a security violation to clear the
authentication and storage keys and to block access to sensitive
information.

Add linux module secvio driver to handle security violation interrupt.

The "imx-secvio-sc" module is designed to report security violations
and tamper triggering to the user.

The functionalities of the module are accessible via the "debugfs"
kernel.The folder containing the interface files for the module is
"<kernel_debugfs>/secvio/".

Get status
Reading from the "info" file will return the status of security:
- Fuse related to security tampers.
- SNVS readable registers.
- DGO registers.

Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
---
Vabhav Sharma (4):
dt-bindings: firmware: secvio: Add device tree bindings
firmware: imx: Add SC APIs required for secvio module
soc: imx: secvio: Add support for SNVS secvio and tamper via SCFW
arm64: dts: imx8q: Add node for Security Violation

.../bindings/arm/freescale/fsl,scu-secvio.yaml | 35 ++
.../devicetree/bindings/firmware/fsl,scu.yaml | 10 +
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 5 +
drivers/firmware/imx/Makefile | 2 +-
drivers/firmware/imx/imx-scu.c | 4 +-
drivers/firmware/imx/seco.c | 216 ++++++++
drivers/soc/imx/Kconfig | 11 +
drivers/soc/imx/Makefile | 1 +
drivers/soc/imx/secvio/Makefile | 2 +
drivers/soc/imx/secvio/imx-secvio-debugfs.c | 274 ++++++++++
drivers/soc/imx/secvio/imx-secvio-sc.c | 595 +++++++++++++++++++++
include/linux/firmware/imx/ipc.h | 1 +
include/linux/firmware/imx/sci.h | 4 +
include/linux/firmware/imx/svc/seco.h | 69 +++
include/soc/imx/imx-secvio-sc.h | 216 ++++++++
15 files changed, 1443 insertions(+), 2 deletions(-)
---
base-commit: 93a39e4766083050ca0ecd6a3548093a3b9eb60c
change-id: 20240508-secvio-8acfa2838385

Best regards,
--
Vabhav Sharma <vabhav.sharma@nxp.com>


\
 
 \ /
  Last update: 2024-05-09 02:45    [W:0.075 / U:2.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site