lkml.org 
[lkml]   [2024]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH net-next v2] net: phy: air_en8811h: reset netdev rules when LED is set manually
Setting LED_OFF via brightness_set should deactivate hw control, so make
sure netdev trigger rules also get cleared in that case.
This fixes unwanted restoration of the default netdev trigger rules and
matches the behaviour when using the 'netdev' trigger without any
hardware offloading.

Fixes: 71e79430117d ("net: phy: air_en8811h: Add the Airoha EN8811H PHY driver")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: send to net-next instead of net tree because driver is present only
in net-next tree. Improve commit description while at it.

drivers/net/phy/air_en8811h.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/air_en8811h.c b/drivers/net/phy/air_en8811h.c
index 4c9a1c9c805e..3cdc8c6b30b6 100644
--- a/drivers/net/phy/air_en8811h.c
+++ b/drivers/net/phy/air_en8811h.c
@@ -544,6 +544,10 @@ static int air_hw_led_on_set(struct phy_device *phydev, u8 index, bool on)

changed |= (priv->led[index].rules != 0);

+ /* clear netdev trigger rules in case LED_OFF has been set */
+ if (!on)
+ priv->led[index].rules = 0;
+
if (changed)
return phy_modify_mmd(phydev, MDIO_MMD_VEND2,
AIR_PHY_LED_ON(index),
--
2.45.0

\
 
 \ /
  Last update: 2024-05-09 12:01    [W:0.021 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site