Messages in this thread Patch in this message | | | From | Justin Lai <> | Subject | [PATCH net-next v18 12/13] realtek: Update the Makefile and Kconfig in the realtek folder | Date | Wed, 8 May 2024 20:39:44 +0800 |
| |
1. Add the RTASE entry in the Kconfig. 2. Add the CONFIG_RTASE entry in the Makefile.
Signed-off-by: Justin Lai <justinlai0215@realtek.com> --- drivers/net/ethernet/realtek/Kconfig | 19 +++++++++++++++++++ drivers/net/ethernet/realtek/Makefile | 1 + 2 files changed, 20 insertions(+)
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig index 03015b665f4e..8a8ea51c639e 100644 --- a/drivers/net/ethernet/realtek/Kconfig +++ b/drivers/net/ethernet/realtek/Kconfig @@ -120,4 +120,23 @@ config R8169_LEDS Optional support for controlling the NIC LED's with the netdev LED trigger. +config RTASE + tristate "Realtek Automotive Switch 9054/9068/9072/9075/9068/9071 PCIe Interface support" + depends on PCI + select CRC32 + select PAGE_POOL + help + Say Y here and it will be compiled and linked with the kernel + if you have a Realtek Ethernet adapter belonging to the + following families: + RTL9054 5GBit Ethernet + RTL9068 5GBit Ethernet + RTL9072 5GBit Ethernet + RTL9075 5GBit Ethernet + RTL9068 5GBit Ethernet + RTL9071 5GBit Ethernet + + To compile this driver as a module, choose M here: the module + will be called rtase. This is recommended. + endif # NET_VENDOR_REALTEK diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile index 635491d8826e..046adf503ff4 100644 --- a/drivers/net/ethernet/realtek/Makefile +++ b/drivers/net/ethernet/realtek/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_ATP) += atp.o r8169-y += r8169_main.o r8169_firmware.o r8169_phy_config.o r8169-$(CONFIG_R8169_LEDS) += r8169_leds.o obj-$(CONFIG_R8169) += r8169.o +obj-$(CONFIG_RTASE) += rtase/ -- 2.34.1
| |