Messages in this thread Patch in this message | | | From | Justin Lai <> | Subject | [PATCH net-next v18 04/13] rtase: Implement the interrupt routine and rtase_poll | Date | Wed, 8 May 2024 20:39:36 +0800 |
| |
1. Implement rtase_interrupt to handle txQ0/rxQ0, txQ4~txQ7 interrupts, and implement rtase_q_interrupt to handle txQ1/rxQ1, txQ2/rxQ2 and txQ3/rxQ3 interrupts. 2. Implement rtase_poll to call ring_handler to process the tx or rx packet of each ring. If the returned value is budget,it means that there is still work of a certain ring that has not yet been completed.
Signed-off-by: Justin Lai <justinlai0215@realtek.com> --- .../net/ethernet/realtek/rtase/rtase_main.c | 89 +++++++++++++++++++ 1 file changed, 89 insertions(+)
diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c index d30dd9bbf09b..a82b80ff990f 100644 --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c @@ -586,6 +586,76 @@ static void rtase_hw_start(const struct net_device *dev) rtase_enable_hw_interrupt(tp); } +/* the interrupt handler does RXQ0 and TXQ0, TXQ4~7 interrutp status + */ +static irqreturn_t rtase_interrupt(int irq, void *dev_instance) +{ + const struct rtase_private *tp; + struct rtase_int_vector *ivec; + u32 status; + + ivec = dev_instance; + tp = ivec->tp; + status = rtase_r32(tp, ivec->isr_addr); + + rtase_w32(tp, ivec->imr_addr, 0x0); + rtase_w32(tp, ivec->isr_addr, status & ~RTASE_FOVW); + + if (napi_schedule_prep(&ivec->napi)) + __napi_schedule(&ivec->napi); + + return IRQ_HANDLED; +} + +/* the interrupt handler does RXQ1&TXQ1 or RXQ2&TXQ2 or RXQ3&TXQ3 interrupt + * status according to interrupt vector + */ +static irqreturn_t rtase_q_interrupt(int irq, void *dev_instance) +{ + const struct rtase_private *tp; + struct rtase_int_vector *ivec; + u16 status; + + ivec = dev_instance; + tp = ivec->tp; + status = rtase_r16(tp, ivec->isr_addr); + + rtase_w16(tp, ivec->imr_addr, 0x0); + rtase_w16(tp, ivec->isr_addr, status); + + if (napi_schedule_prep(&ivec->napi)) + __napi_schedule(&ivec->napi); + + return IRQ_HANDLED; +} + +static int rtase_poll(struct napi_struct *napi, int budget) +{ + const struct rtase_int_vector *ivec; + const struct rtase_private *tp; + struct rtase_ring *ring; + int total_workdone = 0; + + ivec = container_of(napi, struct rtase_int_vector, napi); + tp = ivec->tp; + + list_for_each_entry(ring, &ivec->ring_list, ring_entry) { + total_workdone += ring->ring_handler(ring, budget); + } + + if (total_workdone >= budget) + return budget; + + if (napi_complete_done(napi, total_workdone)) { + if (!ivec->index) + rtase_w32(tp, ivec->imr_addr, ivec->imr); + else + rtase_w16(tp, ivec->imr_addr, ivec->imr); + } + + return total_workdone; +} + static int rtase_open(struct net_device *dev) { struct rtase_private *tp = netdev_priv(dev); @@ -732,9 +802,28 @@ static void rtase_rar_set(const struct rtase_private *tp, const u8 *addr) rtase_w16(tp, RTASE_LBK_CTRL, RTASE_LBK_ATLD | RTASE_LBK_CLR); } +#ifdef CONFIG_NET_POLL_CONTROLLER +/* Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void rtase_netpoll(struct net_device *dev) +{ + const struct rtase_private *tp = netdev_priv(dev); + const struct pci_dev *pdev = tp->pdev; + + disable_irq(pdev->irq); + rtase_interrupt(pdev->irq, dev); + enable_irq(pdev->irq); +} +#endif + static const struct net_device_ops rtase_netdev_ops = { .ndo_open = rtase_open, .ndo_stop = rtase_close, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = rtase_netpoll, +#endif }; static void rtase_get_mac_address(struct net_device *dev) -- 2.34.1
| |