lkml.org 
[lkml]   [2024]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v21 23/39] ALSA: usb-audio: Do not allow USB offload path if PCM device is in use
Date
Add proper checks and updates to the USB substream once receiving a USB QMI
stream enable request. If the substream is already in use from the non
offload path, reject the stream enable request. In addition, update the
USB substream opened parameter when enabling the offload path, so the
non offload path can be blocked.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
sound/usb/qcom/qc_audio_offload.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index eda16d6df0d7..648b97aeae1d 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -1460,12 +1460,17 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
goto response;
}

+ mutex_lock(&chip->mutex);
if (req_msg->enable) {
- if (info_idx < 0 || chip->system_suspend) {
+ if (info_idx < 0 || chip->system_suspend || subs->opened) {
ret = -EBUSY;
+ mutex_unlock(&chip->mutex);
+
goto response;
}
+ subs->opened = 1;
}
+ mutex_unlock(&chip->mutex);

if (req_msg->service_interval_valid) {
ret = get_data_interval_from_si(subs,
@@ -1487,6 +1492,11 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
if (!ret)
ret = prepare_qmi_response(subs, req_msg, &resp,
info_idx);
+ if (ret < 0) {
+ mutex_lock(&chip->mutex);
+ subs->opened = 0;
+ mutex_unlock(&chip->mutex);
+ }
} else {
info = &uadev[pcm_card_num].info[info_idx];
if (info->data_ep_pipe) {
@@ -1510,6 +1520,9 @@ static void handle_uaudio_stream_req(struct qmi_handle *handle,
}

disable_audio_stream(subs);
+ mutex_lock(&chip->mutex);
+ subs->opened = 0;
+ mutex_unlock(&chip->mutex);
}

response:
\
 
 \ /
  Last update: 2024-05-27 18:20    [W:0.399 / U:1.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site