lkml.org 
[lkml]   [2024]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v21 09/39] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
From
Hi Pierre,

On 5/7/2024 1:37 PM, Pierre-Louis Bossart wrote:
>
>> static struct snd_soc_dai_driver q6dsp_audio_fe_dais[] = {
>> + {
>> + .playback = {
>> + .stream_name = "USB Playback",
>> + .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
>> + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |
>> + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |
>> + SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
>> + SNDRV_PCM_RATE_192000,
>> + .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
>> + SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U16_BE |
>> + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE |
>> + SNDRV_PCM_FMTBIT_U24_LE | SNDRV_PCM_FMTBIT_U24_BE,
>> + .channels_min = 1,
>> + .channels_max = 2,
>> + .rate_min = 8000,
>> + .rate_max = 192000,
>> + },
>> + .id = USB_RX,
>> + .name = "USB_RX",
>> + },
>
> Wait, is this saying you will have exactly one PCM device/FE DAI
> connected to the USB BE DAI exposed in patch 11?
>
>> + SND_SOC_DAPM_MIXER("USB Mixer", SND_SOC_NOPM, 0, 0,
>> + usb_mixer_controls,
>> + ARRAY_SIZE(usb_mixer_controls)),
>> +
>
> And then what is the role of the USB mixer if you only have one input?
>
> I must be missing something.
>

Not sure if this is a QCOM specific implementation, but the way the DT
is defined for the USB offload path is as follows:

usb-dai-link {
link-name = "USB Playback";

cpu {
sound-dai = <&q6afedai USB_RX>;
};

codec {
sound-dai = <&usbdai USB_RX>;
};

platform {
sound-dai = <&q6routing>;
};
};

Based on our DT parser helper API (qcom_snd_parse_of()) this isn't going
to create a PCM device. The PCM devices are created for nodes that
don't have a codec and platform defined:

mm1-dai-link {
link-name = "MultiMedia1";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
};

The ASM path is the entity that defines the number of PCM devices that
is created for the QC ASoC platform card, and is where the actual PCM
data is sent over to the DSP. So there could be several PCM devices
that can use the USB BE DAI.

Thanks
Wesley Cheng



\
 
 \ /
  Last update: 2024-05-09 01:35    [W:0.082 / U:0.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site