lkml.org 
[lkml]   [2020]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] vdpa/mlx5: Use write memory barrier after updating CQ index
Date
Make sure to put dma write memory barrier after updating CQ consumer
index so the hardware knows that there are available CQE slots in the
queue.

Failure to do this can cause the update of the RX doorbell record to get
updated before the CQ consumer index resulting in CQ overrun.

Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
---
V0 -> V1
Use dma_wmb() instead of wmb()

drivers/vdpa/mlx5/net/mlx5_vnet.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index db87abc3cb60..43b0069ff8b1 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -479,6 +479,11 @@ static int mlx5_vdpa_poll_one(struct mlx5_vdpa_cq *vcq)
static void mlx5_vdpa_handle_completions(struct mlx5_vdpa_virtqueue *mvq, int num)
{
mlx5_cq_set_ci(&mvq->cq.mcq);
+
+ /* make sure CQ cosumer update is visible to the hardware before updating
+ * RX doorbell record.
+ */
+ dma_wmb();
rx_post(&mvq->vqqp, num);
if (mvq->event_cb.callback)
mvq->event_cb.callback(mvq->event_cb.private);
--
2.27.0
\
 
 \ /
  Last update: 2020-12-09 15:05    [W:0.049 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site