Messages in this thread | | | From | Bongsu Jeon <> | Subject | [PATCH v2 net-next 0/2] nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING | Date | Tue, 8 Dec 2020 23:10:10 +0900 |
| |
From: Bongsu Jeon <bongsu.jeon@samsung.com>
For stable Samsung's I2C interrupt handling, I changed the interrupt trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed the hard coded interrupt trigger type in the i2c module for the flexible control.
1/2 is the changed dt binding for the edge rising trigger. 2/2 is to remove the hard coded interrupt trigger type in the i2c module.
ChangeLog: v2: 2/2 - remove the hard coded interrupt trigger type.
Bongsu Jeon (2): dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to EDGE_RISING nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c module
.../devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml | 2 +- drivers/nfc/s3fwrn5/i2c.c | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-)
-- 2.17.1
| |