Messages in this thread | | | Subject | Re: [PATCH v2 2/4] spi: Add devicetree bindings documentation for Loongson SPI | From | Jiaxun Yang <> | Date | Tue, 8 Dec 2020 15:49:30 +0800 |
| |
在 2020/12/8 15:44, Qing Zhang 写道: > Add spi-ls7a binding documentation. > > Signed-off-by: Qing Zhang <zhangqing@loongson.cn> > --- > Documentation/devicetree/bindings/spi/spi-ls7a.txt | 31 ++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > create mode 100644 Documentation/devicetree/bindings/spi/spi-ls7a.txt
Hi Qing,
Please use dt schema instead.
Thanks.
- Jiaxun
> diff --git a/Documentation/devicetree/bindings/spi/spi-ls7a.txt b/Documentation/devicetree/bindings/spi/spi-ls7a.txt > new file mode 100644 > index 0000000..56247b5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/spi/spi-ls7a.txt > @@ -0,0 +1,31 @@ > +Binding for LOONGSON LS7A SPI controller > + > +Required properties: > +- compatible: should be "pci0014,7a0b.0","pci0014,7a0b","pciclass088000","pciclass0880". > +- reg: reference IEEE Std 1275-1994. > +- #address-cells: <1>, as required by generic SPI binding. > +- #size-cells: <0>, also as required by generic SPI binding. > +- #interrupts: No hardware interrupt. > + > +Child nodes as per the generic SPI binding. > + > +Example: > + > + spi@16,0 { > + compatible = "pci0014,7a0b.0", > + "pci0014,7a0b", > + "pciclass088000", > + "pciclass0880"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0xb000 0x0 0x0 0x0 0x0>; > + num-chipselects = <0>; > + spiflash: s25fl016k@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible ="spansion,s25fl016k","jedec,spi-nor"; > + spi-max-frequency=<50000000>; > + reg=<0>; > + }; > + };
| |