lkml.org 
[lkml]   [2020]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 16/32] ibmvnic: Ensure that SCRQ entry reads are correctly ordered
Date
From: Thomas Falcon <tlfalcon@linux.ibm.com>

[ Upstream commit b71ec952234610b4f90ef17a2fdcb124d5320070 ]

Ensure that received Subordinate Command-Response Queue (SCRQ)
entries are properly read in order by the driver. These queues
are used in the ibmvnic device to process RX buffer and TX completion
descriptors. dma_rmb barriers have been added after checking for a
pending descriptor to ensure the correct descriptor entry is checked
and after reading the SCRQ descriptor to ensure the entire
descriptor is read before processing.

Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/ibm/ibmvnic.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2162,6 +2162,12 @@ restart_poll:

if (!pending_scrq(adapter, adapter->rx_scrq[scrq_num]))
break;
+ /* The queue entry at the current index is peeked at above
+ * to determine that there is a valid descriptor awaiting
+ * processing. We want to be sure that the current slot
+ * holds a valid descriptor before reading its contents.
+ */
+ dma_rmb();
next = ibmvnic_next_scrq(adapter, adapter->rx_scrq[scrq_num]);
rx_buff =
(struct ibmvnic_rx_buff *)be64_to_cpu(next->
@@ -2784,6 +2790,13 @@ restart_loop:
unsigned int pool = scrq->pool_index;
int num_entries = 0;

+ /* The queue entry at the current index is peeked at above
+ * to determine that there is a valid descriptor awaiting
+ * processing. We want to be sure that the current slot
+ * holds a valid descriptor before reading its contents.
+ */
+ dma_rmb();
+
next = ibmvnic_next_scrq(adapter, scrq);
for (i = 0; i < next->tx_comp.num_comps; i++) {
if (next->tx_comp.rcs[i]) {
@@ -3180,6 +3193,11 @@ static union sub_crq *ibmvnic_next_scrq(
}
spin_unlock_irqrestore(&scrq->lock, flags);

+ /* Ensure that the entire buffer descriptor has been
+ * loaded before reading its contents
+ */
+ dma_rmb();
+
return entry;
}


\
 
 \ /
  Last update: 2020-12-06 13:09    [W:0.187 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site