lkml.org 
[lkml]   [2020]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: typec: intel_pmc_mux: Use correct response message bits
Date
When Intel PMC Mux agent driver receives the response message from PMC, it
checks for the same response bits for all the mux states.
Corrected it by checking correct response message bits, Bit 8 & 9 for the
SAFE Mode and Alternate Modes and Bit 16 & 17 for the Connect and
Disconnect Modes.

Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
---
drivers/usb/typec/mux/intel_pmc_mux.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index aa3211f1c4c3..e58ae8a7fefb 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -176,6 +176,7 @@ static int hsl_orientation(struct pmc_usb_port *port)
static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
{
u8 response[4];
+ u8 status_res;
int ret;

/*
@@ -189,9 +190,13 @@ static int pmc_usb_command(struct pmc_usb_port *port, u8 *msg, u32 len)
if (ret)
return ret;

- if (response[2] & PMC_USB_RESP_STATUS_FAILURE) {
- if (response[2] & PMC_USB_RESP_STATUS_FATAL)
+ status_res = (msg[0] & 0xf) < PMC_USB_SAFE_MODE ?
+ response[2] : response[1];
+
+ if (status_res & PMC_USB_RESP_STATUS_FAILURE) {
+ if (status_res & PMC_USB_RESP_STATUS_FATAL)
return -EIO;
+
return -EBUSY;
}

--
2.17.1
\
 
 \ /
  Last update: 2020-12-03 23:12    [W:0.051 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site