lkml.org 
[lkml]   [2020]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/6] v3u: add SDHI/MMC support
Date
So, this series adds SDHI/MMC support to the Renesas R-Car V3U SoC.
While SDHI is usually complicated, adding basic support to V3U was
refreshingly uncomplicated :) The crux was this time in the CPG driver.
In order to avoid code duplication, a CPG library was introduced, so we
can share the SD clock handling between generic Gen3, V3U, and hopefully
Gen4 later. The library turned out to be a quite nice solution for SDHI.
I am quite happy with it. I think we could have a similar benefit for
RPC, but we still need to see if this is enabled on V3U after all.

So much for now, looking forward to comments. The branch is here:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/v3u/sdhi

Happy hacking,

Wolfram

Takeshi Saito (2):
arm64: dts: renesas: r8a779a0: Add MMC node
arm64: dts: renesas: falcon: Enable MMC

Wolfram Sang (4):
dt-bindings: mmc: renesas,sdhi: Add r8a779a0 support
clk: renesas: rcar-gen3: remove cpg_quirks access when registering SD
clock
clk: renesas: rcar-gen3: factor out CPG library
clk: renesas: r8a779a0: add SDHI support

.../devicetree/bindings/mmc/renesas,sdhi.yaml | 1 +
.../boot/dts/renesas/r8a779a0-falcon.dts | 41 +++
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 12 +
drivers/clk/renesas/Kconfig | 5 +
drivers/clk/renesas/Makefile | 1 +
drivers/clk/renesas/r8a779a0-cpg-mssr.c | 17 +-
drivers/clk/renesas/rcar-cpg-lib.c | 270 ++++++++++++++++++
drivers/clk/renesas/rcar-cpg-lib.h | 33 +++
drivers/clk/renesas/rcar-gen3-cpg.c | 267 +----------------
9 files changed, 387 insertions(+), 260 deletions(-)
create mode 100644 drivers/clk/renesas/rcar-cpg-lib.c
create mode 100644 drivers/clk/renesas/rcar-cpg-lib.h

--
2.28.0

\
 
 \ /
  Last update: 2020-12-27 18:44    [W:1.858 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site