lkml.org 
[lkml]   [2020]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 6/8] usb: chipidea: tegra: Support runtime PM
On Thu, Dec 17, 2020 at 12:40:05PM +0300, Dmitry Osipenko wrote:
> Tegra PHY driver now supports waking up controller from a low power mode.
> Enable runtime PM in order to put controller into the LPM during idle.
>
> Tested-by: Matt Merhar <mattmerhar@protonmail.com>
> Tested-by: Nicolas Chauvet <kwizart@gmail.com>
> Tested-by: Peter Geis <pgwipeout@gmail.com>
> Tested-by: Ion Agorria <ion@agorria.com>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
> drivers/usb/chipidea/ci_hdrc_tegra.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c
> index 5fccdeeefc64..655671159511 100644
> --- a/drivers/usb/chipidea/ci_hdrc_tegra.c
> +++ b/drivers/usb/chipidea/ci_hdrc_tegra.c
> @@ -38,21 +38,24 @@ struct tegra_usb_soc_info {
>
> static const struct tegra_usb_soc_info tegra20_ehci_soc_info = {
> .flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
> - CI_HDRC_OVERRIDE_PHY_CONTROL,
> + CI_HDRC_OVERRIDE_PHY_CONTROL |
> + CI_HDRC_SUPPORTS_RUNTIME_PM,
> .dr_mode = USB_DR_MODE_HOST,
> .txfifothresh = 10,
> };
>
> static const struct tegra_usb_soc_info tegra30_ehci_soc_info = {
> .flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
> - CI_HDRC_OVERRIDE_PHY_CONTROL,
> + CI_HDRC_OVERRIDE_PHY_CONTROL |
> + CI_HDRC_SUPPORTS_RUNTIME_PM,
> .dr_mode = USB_DR_MODE_HOST,
> .txfifothresh = 16,
> };
>
> static const struct tegra_usb_soc_info tegra_udc_soc_info = {
> .flags = CI_HDRC_REQUIRES_ALIGNED_DMA |
> - CI_HDRC_OVERRIDE_PHY_CONTROL,
> + CI_HDRC_OVERRIDE_PHY_CONTROL |
> + CI_HDRC_SUPPORTS_RUNTIME_PM,
> .dr_mode = USB_DR_MODE_UNKNOWN,
> };
>
> @@ -323,6 +326,10 @@ static int tegra_usb_probe(struct platform_device *pdev)
> usb->data.hub_control = tegra_ehci_hub_control;
> usb->data.notify_event = tegra_usb_notify_event;
>
> + /* Tegra PHY driver currently doesn't support LPM for ULPI */
> + if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_ULPI)
> + usb->data.flags &= ~CI_HDRC_SUPPORTS_RUNTIME_PM;
> +

Does this prevent the wakeup_enabled from being set for ULPI PHYs?

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-12-17 14:44    [W:0.425 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site