Messages in this thread Patch in this message | | | From | Sébastien Szymanski <> | Subject | [PATCH 1/1] ARM: dts: opos6ul: add ksz8081 phy properties | Date | Thu, 17 Dec 2020 11:49:05 +0100 |
| |
Set clock mode and the LED mode in the device tree instead of relying on the fixup in mach-imx6ul.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> --- arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi index f2386dcb9ff2..dda4fa91b2f2 100644 --- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi @@ -40,6 +40,9 @@ ethphy1: ethernet-phy@1 { reg = <1>; interrupt-parent = <&gpio4>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; status = "okay"; }; }; -- 2.26.2
| |