Messages in this thread Patch in this message | | | From | Shengjiu Wang <> | Subject | [PATCH] clk: imx: imx8mp: Add delay after power up | Date | Thu, 25 Apr 2024 18:19:24 +0800 |
| |
According to comments in drivers/pmdomain/imx/gpcv2.c:
/* request the ADB400 to power up */ if (domain->bits.hskreq) { regmap_update_bits(domain->regmap, domain->regs->hsk, domain->bits.hskreq, domain->bits.hskreq);
/* * ret = regmap_read_poll_timeout(domain->regmap, domain->regs->hsk, reg_val, * (reg_val & domain->bits.hskack), 0, * USEC_PER_MSEC); * Technically we need the commented code to wait handshake. But that needs * the BLK-CTL module BUS clk-en bit being set. * * There is a separate BLK-CTL module and we will have such a driver for it, * that driver will set the BUS clk-en bit and handshake will be triggered * automatically there. Just add a delay and suppose the handshake finish * after that. */ }
The BLK-CTL module needs to add delay to wait for a handshake request finished before accessing registers, which is just after the enabling of power domain.
Otherwise there is error:
[ 2.180834] SError Interrupt on CPU1, code 0x00000000bf000002 -- SError [ 2.180849] CPU: 1 PID: 48 Comm: kworker/u16:2 Not tainted 6.9.0-rc5-next-20240424-00003-g21cec88845c6 #171 [ 2.180856] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 2.180861] Workqueue: events_unbound deferred_probe_work_func [ 2.180878] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.180885] pc : clk_imx8mp_audiomix_runtime_resume+0x34/0x44 [ 2.180900] lr : pm_generic_runtime_resume+0x2c/0x44 [ 2.180910] sp : ffff800083423a20 [ 2.180913] x29: ffff800083423a20 x28: 0000000000000000 x27: 0000000000000000 [ 2.180922] x26: ffff0000c0e4e410 x25: 0000000000000000 x24: 0000000000000000 [ 2.180935] x23: 0000000000000000 x22: ffff0000c02afd20 x21: 0000000000000000 [ 2.180945] x20: ffff0000c162a000 x19: ffff0000c0e52810 x18: ffffffffffffffff [ 2.180959] x17: 0000000000000000 x16: 0000000000000100 x15: ffff8000834239f0 [ 2.180970] x14: ffff0000c03d0a1c x13: ffff0000c0a03440 x12: 00000000000003c7 [ 2.180982] x11: 0000000000000000 x10: ffff8000825010ba x9 : 0000000000000008 [ 2.180993] x8 : 0000000000000008 x7 : 0000000000000000 x6 : 0000000000000000 [ 2.181005] x5 : ffff8000838b0000 x4 : ffff0000c0e66088 x3 : ffff8000813852c0 [ 2.181018] x2 : 0000000000000000 x1 : 0000000000000004 x0 : ffff8000838b0300 [ 2.181035] Kernel panic - not syncing: Asynchronous SError Interrupt [ 2.181038] CPU: 1 PID: 48 Comm: kworker/u16:2 Not tainted 6.9.0-rc5-next-20240424-00003-g21cec88845c6 #171 [ 2.181047] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 2.181050] Workqueue: events_unbound deferred_probe_work_func [ 2.181064] Call trace: [ 2.181066] dump_backtrace+0x90/0xe8 [ 2.181080] show_stack+0x18/0x24 [ 2.181091] dump_stack_lvl+0x34/0x8c [ 2.181104] dump_stack+0x18/0x24 [ 2.181117] panic+0x39c/0x3d0 [ 2.181129] nmi_panic+0x48/0x94 [ 2.181142] arm64_serror_panic+0x6c/0x78 [ 2.181149] do_serror+0x3c/0x70 [ 2.181157] el1h_64_error_handler+0x30/0x48 [ 2.181164] el1h_64_error+0x64/0x68 [ 2.181171] clk_imx8mp_audiomix_runtime_resume+0x34/0x44 [ 2.181183] __genpd_runtime_resume+0x30/0x80 [ 2.181195] genpd_runtime_resume+0x110/0x244 [ 2.181205] __rpm_callback+0x48/0x1d8 [ 2.181213] rpm_callback+0x68/0x74 [ 2.181224] rpm_resume+0x468/0x6c0 [ 2.181234] __pm_runtime_resume+0x50/0x94 [ 2.181243] pm_runtime_get_suppliers+0x60/0x8c [ 2.181258] __driver_probe_device+0x48/0x12c [ 2.181268] driver_probe_device+0xd8/0x15c [ 2.181278] __device_attach_driver+0xb8/0x134 [ 2.181290] bus_for_each_drv+0x84/0xe0 [ 2.181302] __device_attach+0x9c/0x188 [ 2.181312] device_initial_probe+0x14/0x20 [ 2.181323] bus_probe_device+0xac/0xb0 [ 2.181334] deferred_probe_work_func+0x88/0xc0 [ 2.181344] process_one_work+0x150/0x290 [ 2.181357] worker_thread+0x2f8/0x408 [ 2.181370] kthread+0x110/0x114 [ 2.181381] ret_from_fork+0x10/0x20 [ 2.181391] SMP: stopping secondary CPUs [ 2.181400] Kernel Offset: disabled [ 2.181403] CPU features: 0x0,00000040,00100000,4200421b [ 2.181407] Memory Limit: none [ 2.463040] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
Fixes: 1496dd413b2e ("clk: imx: imx8mp: Add pm_runtime support for power saving") Reported-by: Francesco Dolcini <francesco@dolcini.it> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- drivers/clk/imx/clk-imx8mp-audiomix.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c b/drivers/clk/imx/clk-imx8mp-audiomix.c index e4231e9c8f05..cb44c460548e 100644 --- a/drivers/clk/imx/clk-imx8mp-audiomix.c +++ b/drivers/clk/imx/clk-imx8mp-audiomix.c @@ -6,6 +6,7 @@ */ #include <linux/clk-provider.h> +#include <linux/delay.h> #include <linux/device.h> #include <linux/io.h> #include <linux/mod_devicetable.h> @@ -362,6 +363,12 @@ static int clk_imx8mp_audiomix_runtime_suspend(struct device *dev) static int clk_imx8mp_audiomix_runtime_resume(struct device *dev) { + /* + * According to the drivers/pmdomain/imx/gpcv2.c + * need to wait for handshake request to propagate + */ + udelay(5); + clk_imx8mp_audiomix_save_restore(dev, false); return 0; -- 2.34.1
| |