lkml.org 
[lkml]   [2024]   [Apr]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] hwmon: max31790: revise the scale to write pwm
On Tue, Apr 16, 2024 at 10:22:11AM +0800, Delphine CC Chiu wrote:
> Since the value for PWMOUT Target Duty Cycle register is a 9 bit
> left-justified value that ranges from 0 to 511 and is contained in 2
> bytes.
>
> There is an issue that the PWM signal recorded by oscilloscope would
> not be on consistently if we set PWM to 100% to the driver.
>
> It is because the LSB of the 9 bit would always be zero if it just
> left shift 8 bit for the value that write to PWMOUT Target Duty
> Cycle register.
>
> Therefore, revise the scale of the value that was written to pwm input
> from 255 to 511 and modify the value to left-justified value.
>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>

Applied.

Thanks,
Guenter

\
 
 \ /
  Last update: 2024-04-28 20:31    [W:0.023 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site