lkml.org 
[lkml]   [2024]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net-next 4/4] net: dsa: realtek: add LED drivers for rtl8366rb
From
On 10/03/2024 05:52, Luiz Angelo Daros de Luca wrote:
> This commit introduces LED drivers for rtl8366rb, enabling LEDs to be
> described in the device tree using the same format as qca8k. Each port
> can configure up to 4 LEDs.
>
> If all LEDs in a group use the default state "keep", they will use the
> default behavior after a reset. Changing the brightness of one LED,
> either manually or by a trigger, will disable the default hardware
> trigger and switch the entire LED group to manually controlled LEDs.
> Once in this mode, there is no way to revert to hardware-controlled LEDs
> (except by resetting the switch).
>
> Software triggers function as expected with manually controlled LEDs.
>
> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Again, this is the first version, so how could you have a review?

Best regards,
Krzysztof


\
 
 \ /
  Last update: 2024-05-27 15:43    [W:0.244 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site