lkml.org 
[lkml]   [2024]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v10 4/6] arm64: dts: qcom: sm8450: Add OPP table support to PCIe
PCIe needs to choose the appropriate performance state of RPMh power
domain and interconnect bandwidth based up on the PCIe data rate.

Add the OPP table support to specify RPMh performance states and
interconnect peak bandwidth.

Different link configurations may share the same aggregate bandwidth,
e.g., a 2.5 GT/s x2 link and a 5.0 GT/s x1 link have the same bandwidth
and share the same OPP entry.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
---
arch/arm64/boot/dts/qcom/sm8450.dtsi | 77 ++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 615296e13c43..9dfe16012726 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1855,7 +1855,35 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
pinctrl-names = "default";
pinctrl-0 = <&pcie0_default_state>;

+ operating-points-v2 = <&pcie0_opp_table>;
+
status = "disabled";
+
+ pcie0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* GEN 1 x1 */
+ opp-2500000 {
+ opp-hz = /bits/ 64 <2500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <250000 1>;
+ };
+
+ /* GEN 2 x1 */
+ opp-5000000 {
+ opp-hz = /bits/ 64 <5000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <500000 1>;
+ };
+
+ /* GEN 3 x1 */
+ opp-8000000 {
+ opp-hz = /bits/ 64 <8000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <984500 1>;
+ };
+ };
+
};

pcie0_phy: phy@1c06000 {
@@ -1982,7 +2010,56 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
pinctrl-names = "default";
pinctrl-0 = <&pcie1_default_state>;

+ operating-points-v2 = <&pcie1_opp_table>;
+
status = "disabled";
+
+ pcie1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* GEN 1 x1 */
+ opp-2500000 {
+ opp-hz = /bits/ 64 <2500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <250000 1>;
+ };
+
+ /* GEN 1 x2 GEN 2 x1 */
+ opp-5000000 {
+ opp-hz = /bits/ 64 <5000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <500000 1>;
+ };
+
+ /* GEN 2 x2 */
+ opp-10000000 {
+ opp-hz = /bits/ 64 <10000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <1000000 1>;
+ };
+
+ /* GEN 3 x1 */
+ opp-8000000 {
+ opp-hz = /bits/ 64 <8000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <984500 1>;
+ };
+
+ /* GEN 3 x2 GEN 4 x1 */
+ opp-16000000 {
+ opp-hz = /bits/ 64 <16000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <1969000 1>;
+ };
+
+ /* GEN 4 x2 */
+ opp-32000000 {
+ opp-hz = /bits/ 64 <32000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ opp-peak-kBps = <3938000 1>;
+ };
+ };
+
};

pcie1_phy: phy@1c0e000 {
--
2.42.0


\
 
 \ /
  Last update: 2024-05-27 16:30    [W:2.396 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site