lkml.org 
[lkml]   [2024]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 2/2] ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node name
Follow the gpio-hog bindings and use otg-hog as node name.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
index 4aaae8537a3f..06549051be50 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -328,7 +328,7 @@ wlan_regulator_pin: wl-reg-active-state {
power-source = <PM8941_GPIO_S3>;
};

- otg {
+ otg-hog {
gpio-hog;
gpios = <35 GPIO_ACTIVE_HIGH>;
output-high;
--
2.44.0


\
 
 \ /
  Last update: 2024-05-27 16:31    [W:0.994 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site