lkml.org 
[lkml]   [2024]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/3] hwmon: (coretemp) Use a model-specific bitmask to read registers
Date
On Sat, 2024-04-06 at 06:17 -0700, Guenter Roeck wrote:
> On Fri, Apr 05, 2024 at 06:04:16PM -0700, Ricardo Neri wrote:
> > The Intel Software Development manual defines states the
> > temperature
> > digital readout as the bits [22:16] of the
> > IA32_[PACKAGE]_THERM_STATUS
> > registers. In recent processor, however, the range is [23:16]. Use
> > a
> > model-specific bitmask to extract the temperature readout
> > correctly.
> >
> > Instead of re-implementing model checks, extract the correct
> > bitmask
> > using the intel_tcc library. Add an 'imply' weak reverse dependency
> > on
> > CONFIG_INTEL_TCC. This captures the dependency and lets user to
> > unselect
> > them if they are so inclined. In such case, the bitmask used for
> > the
> > digital readout is [22:16] as specified in the Intel Software
> > Developer's
> > manual.
> >
> > Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
> > ---
> > Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> > Cc: Lukasz Luba <lukasz.luba@arm.com>
> > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> > Cc: linux-hwmon@vger.kernel.org
> > Cc: linux-pm@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > Cc: stable@vger.kernel.org # v6.7+
> > ---
> >  drivers/hwmon/Kconfig    | 1 +
> >  drivers/hwmon/coretemp.c | 6 +++++-
> >  2 files changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 83945397b6eb..11d72b3009bf 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -847,6 +847,7 @@ config SENSORS_I5500
> >  config SENSORS_CORETEMP
> >         tristate "Intel Core/Core2/Atom temperature sensor"
> >         depends on X86
> > +       imply INTEL_TCC
>
> I do not think it is appropriate to make a hardware monitoring driver
> depend on the thermal subsystem.
>
> NAK in the current form.
>
Hi, Guenter,

Thanks for reviewing.

We've seen a couple of hwmon drivers depends on or imply THERMAL.
That's why we think this is an applicable solution.
Using the intel_tcc APIs can effectively reduce the future maintenance
burden because we don't need to duplicate the model list in multiple
places.

or do you have any suggestions?

thanks,
rui
\
 
 \ /
  Last update: 2024-05-27 16:27    [W:0.097 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site