lkml.org 
[lkml]   [2024]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 5/5] arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode
From


On 29/04/24 16:01, Krzysztof Kozlowski wrote:
> On 29/03/2024 06:31, Chintan Vankar wrote:
>> From: Siddharth Vadapalli <s-vadapalli@ti.com>
>>
>> The CPSW9G instance of the CPSW Ethernet Switch supports USXGMII mode
>> with MAC Ports 1 and 2 of the instance, which are connected to ENET
>> Expansion 1 and ENET Expansion 2 slots on the EVM respectively, through
>> the Serdes2 instance of the SERDES.
>>
>> Enable CPSW9G MAC Ports 1 and 2 in fixed-link configuration USXGMII mode
>> at 5 Gbps each.
>>
>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
>> Signed-off-by: Chintan Vankar <c-vankar@ti.com>
>> ---
>>
>> Link to v5:
>> https://lore.kernel.org/r/20240314072129.1520475-6-c-vankar@ti.com/
>>
>> Changes from v5 to v6:
>> - Updated order of properties in Device Nodes based on
>> https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
>>
>> arch/arm64/boot/dts/ti/Makefile | 6 +-
>> .../ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso | 81 +++++++++++++++++++
>> 2 files changed, 86 insertions(+), 1 deletion(-)
>> create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso
>>
>> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
>> index f8e47278df43..2d798ef415e4 100644
>> --- a/arch/arm64/boot/dts/ti/Makefile
>> +++ b/arch/arm64/boot/dts/ti/Makefile
>> @@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb
>> dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
>> dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
>> dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
>> +dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
>>
>> # Build time test only, enabled by CONFIG_OF_ALL_DTBS
>> k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
>> @@ -148,6 +149,8 @@ k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
>> k3-j721s2-evm-pcie1-ep.dtbo
>> k3-j784s4-evm-quad-port-eth-exp1-dtbs := k3-j784s4-evm.dtb \
>> k3-j784s4-evm-quad-port-eth-exp1.dtbo
>> +k3-j784s4-evm-usxgmii-exp1-exp2.dtbs := k3-j784s4-evm.dtb \
>> + k3-j784s4-evm-usxgmii-exp1-exp2.dtbo\
>
> I have doubts this commit was ever built. It clearly fails, just like
> now linux-next fails.
>

Apologies for the syntax error here, I will fix it and post next
version.

> Best regards,
> Krzysztof
>

\
 
 \ /
  Last update: 2024-04-29 13:46    [W:0.045 / U:1.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site