lkml.org 
[lkml]   [2024]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/8] spi: sun6i: use 'time_left' variable with wait_for_completion_timeout()
Date
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:

timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Fix to the proper variable type 'unsigned long' while here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/spi/spi-sun6i.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index cd018ea1abf1..7bbe7ea0d66a 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -277,7 +277,8 @@ static int sun6i_spi_transfer_one(struct spi_controller *host,
struct spi_transfer *tfr)
{
struct sun6i_spi *sspi = spi_controller_get_devdata(host);
- unsigned int div, div_cdr1, div_cdr2, timeout;
+ unsigned int div, div_cdr1, div_cdr2;
+ unsigned long time_left;
unsigned int start, end, tx_time;
unsigned int trig_level;
unsigned int tx_len = 0, rx_len = 0, nbits = 0;
@@ -488,26 +489,26 @@ static int sun6i_spi_transfer_one(struct spi_controller *host,

tx_time = spi_controller_xfer_timeout(host, tfr);
start = jiffies;
- timeout = wait_for_completion_timeout(&sspi->done,
- msecs_to_jiffies(tx_time));
+ time_left = wait_for_completion_timeout(&sspi->done,
+ msecs_to_jiffies(tx_time));

if (!use_dma) {
sun6i_spi_drain_fifo(sspi);
} else {
- if (timeout && rx_len) {
+ if (time_left && rx_len) {
/*
* Even though RX on the peripheral side has finished
* RX DMA might still be in flight
*/
- timeout = wait_for_completion_timeout(&sspi->dma_rx_done,
- timeout);
- if (!timeout)
+ time_left = wait_for_completion_timeout(&sspi->dma_rx_done,
+ time_left);
+ if (!time_left)
dev_warn(&host->dev, "RX DMA timeout\n");
}
}

end = jiffies;
- if (!timeout) {
+ if (!time_left) {
dev_warn(&host->dev,
"%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
dev_name(&spi->dev), tfr->len, tfr->speed_hz,
--
2.43.0

\
 
 \ /
  Last update: 2024-04-29 13:30    [W:0.136 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site