lkml.org 
[lkml]   [2024]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 4/4] arm64: dts: add description for solidrun cn9131 solidwan board
Date
Am 26.04.24 um 20:18 schrieb Andrew Lunn:
>>>> Colours are similar to RJ45 connectors (yellow, green),
>>>> and are intended for the same purpose: link, activity.
>>> For the switch LEDs you used label = "LED10"; Does the silk screen
>>> have similar numbers for these LEDs?
>> Correct, on CN9130 Clearfog Pro DSA switch, all LEDs are labeled
>> individually on the silk screen.
>>
>> The SolidWAN SFP leds are dual-colour leds with 3 terminals:
>> anode to 3.3V, 2x cathode to gpio-controlled transistors.
>> They are labeled on the silk-screen as "LED9", "LED10".
>>
>> Duplicate labels are not great, is there a better way?
>> old style "LED9:green" e.g. ...?
> So you have copper LEDs and SFP LEDs, each with the same silk screen
> label? Maybe put 'copper' and 'sfp' as a prefix into the label?

No, not quite.

We have 2x SFP Connectors.
On the bottom side of PCB immediately below each connector is
a single LED (as in physical component), each with a silk-screen label.

"J28"/"SFP 0": "LED10"
"J42"/"SFP 1": "LED9"

The problem is that these leds are each two leds in single-package,
which is why I put 4 led nodes in dts, two labeled "sfp-0",
other two "sfp-1".
But I don't think this duplication of label in dts is a good idea.

\
 
 \ /
  Last update: 2024-04-26 20:51    [W:0.066 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site