lkml.org 
[lkml]   [2024]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 1/2] Revise mux and hardware in yosemite4 dts
From
Date
On Thu, 2024-04-25 at 14:06 +0800, Delphine CC Chiu wrote:
> ARM: dts: aspeed: yosemite4:

This should be in the patch subject, not the body of the commit
message.

> Change hardware configuration, consequently modifying the mux in the dts.

Perhaps "We have a new iteration of the hardware design, so update the
devicetree to match."?

>
> Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>

Overall it feels a bit untidy updating the description of distinct
devices in the one patch.

> ---
> .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 78 ++++++++++++++-----
> 1 file changed, 58 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> index 64075cc41d92..e45293762316 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> @@ -433,16 +433,14 @@ eeprom@51 {
> reg = <0x51>;
> };
>
> - i2c-mux@71 {
> - compatible = "nxp,pca9846";
> + i2c-mux@74 {
> + compatible = "nxp,pca9546";
> #address-cells = <1>;
> #size-cells = <0>;
> -
> - idle-state = <0>;
> i2c-mux-idle-disconnect;
> - reg = <0x71>;
> + reg = <0x74>;
>
> - i2c@0 {
> + inux30: i2c@0{

'inux'? 'imux'?

> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0>;
> @@ -450,26 +448,46 @@ i2c@0 {
> adc@1f {
> compatible = "ti,adc128d818";
> reg = <0x1f>;
> - ti,mode = /bits/ 8 <2>;
> + ti,mode = /bits/ 8 <1>;
> };
>
> pwm@20{
> - compatible = "max31790";
> - reg = <0x20>;
> + compatible = "maxim,max31790";

This looks like a change motivated by binding validation or a driver
change rather than hardware design :)

> #address-cells = <1>;
> #size-cells = <0>;
> + reg = <0x20>;
> + channel@4 {
> + reg = <4>;
> + sensor-type = "TACH";
> + };
> +
> + channel@5 {
> + reg = <5>;
> + sensor-type = "TACH";
> + };
> };
>
> gpio@22{
> compatible = "ti,tca6424";
> reg = <0x22>;
> + gpio-controller;
> + #gpio-cells = <2>;
> };
>
> - pwm@23{
> - compatible = "max31790";
> - reg = <0x23>;
> + pwm@2f{
> + compatible = "maxim,max31790";

Again here

Andrew

\
 
 \ /
  Last update: 2024-04-26 02:52    [W:0.043 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site