lkml.org 
[lkml]   [2024]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 08/14] dt-bindings: fsi: ast2600-fsi-master: Switch to yaml format
Date
Switch to yaml for the AST2600 FSI master documentation.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
.../fsi/aspeed,ast2600-fsi-master.yaml | 72 +++++++++++++++++++
.../bindings/fsi/fsi-master-aspeed.txt | 36 ----------
2 files changed, 72 insertions(+), 36 deletions(-)
create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt

diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
new file mode 100644
index 000000000000..f053e3e1d259
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed FSI master
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description:
+ The AST2600 and later contain two identical FSI masters. They share a
+ clock and have a separate interrupt line and output pins.
+
+properties:
+ compatible:
+ enum:
+ - "aspeed,ast2600-fsi-master"
+ - "aspeed,ast2700-fsi-master"
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ cfam-reset-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin for CFAM reset
+
+ fsi-routing-gpios:
+ maxItems: 1
+ description:
+ Output GPIO pin for setting the FSI mux (internal or cabled)
+
+ fsi-mux-gpios:
+ maxItems: 1
+ description:
+ Input GPIO pin for detecting the desired FSI mux state
+
+ interrupts:
+ maxItems: 1
+
+allOf:
+ - $ref: fsi-controller.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ast2600-clock.h>
+ #include <dt-bindings/gpio/aspeed-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ fsi-master@1e79b000 {
+ compatible = "aspeed,ast2600-fsi-master";
+ reg = <0x1e79b000 0x94>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fsi1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+ fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+ fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
deleted file mode 100644
index 9853fefff5d8..000000000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device-tree bindings for AST2600 FSI master
--------------------------------------------
-
-The AST2600 contains two identical FSI masters. They share a clock and have a
-separate interrupt line and output pins.
-
-Required properties:
- - compatible: "aspeed,ast2600-fsi-master"
- - reg: base address and length
- - clocks: phandle and clock number
- - interrupts: platform dependent interrupt description
- - pinctrl-0: phandle to pinctrl node
- - pinctrl-names: pinctrl state
-
-Optional properties:
- - cfam-reset-gpios: GPIO for CFAM reset
-
- - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
- - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
-
-
-Examples:
-
- fsi-master {
- compatible = "aspeed,ast2600-fsi-master", "fsi-master";
- reg = <0x1e79b000 0x94>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fsi1_default>;
- clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-
- fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
- fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-
- cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
- };
--
2.39.3

\
 
 \ /
  Last update: 2024-04-25 23:38    [W:1.371 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site