lkml.org 
[lkml]   [2024]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v1 02/16] thermal: gov_bang_bang: Use .trip_crossed() instead of .throttle()
From


On 4/10/24 17:04, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> The Bang-Bang governor really is only concerned about trip point
> crossing, so it can use the new .trip_crossed() callback instead of
> .throttle() that is not particularly suitable for it.
>
> Modify it to do so which also takes trip hysteresis into account, so the
> governor does not need to use it directly any more.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> drivers/thermal/gov_bang_bang.c | 31 +++++++++++++------------------
> 1 file changed, 13 insertions(+), 18 deletions(-)
>
> Index: linux-pm/drivers/thermal/gov_bang_bang.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/gov_bang_bang.c
> +++ linux-pm/drivers/thermal/gov_bang_bang.c
> @@ -13,8 +13,9 @@
>
> #include "thermal_core.h"
>
> -static int thermal_zone_trip_update(struct thermal_zone_device *tz,
> - const struct thermal_trip *trip)
> +static void thermal_zone_trip_update(struct thermal_zone_device *tz,
> + const struct thermal_trip *trip,
> + bool crossed_up)
> {
> int trip_index = thermal_zone_trip_id(tz, trip);
> struct thermal_instance *instance;
> @@ -43,13 +44,12 @@ static int thermal_zone_trip_update(stru
> }
>
> /*
> - * enable fan when temperature exceeds trip_temp and disable
> - * the fan in case it falls below trip_temp minus hysteresis
> + * Enable the fan when the trip is crossed on the way up and
> + * disable it when the trip is crossed on the way down.
> */
> - if (instance->target == 0 && tz->temperature >= trip->temperature)
> + if (instance->target == 0 && crossed_up)
> instance->target = 1;
> - else if (instance->target == 1 &&
> - tz->temperature < trip->temperature - trip->hysteresis)
> + else if (instance->target == 1 && !crossed_up)
> instance->target = 0;
>
> dev_dbg(&instance->cdev->device, "target=%d\n",
> @@ -59,14 +59,13 @@ static int thermal_zone_trip_update(stru
> instance->cdev->updated = false; /* cdev needs update */
> mutex_unlock(&instance->cdev->lock);
> }
> -
> - return 0;
> }
>
> /**
> * bang_bang_control - controls devices associated with the given zone
> * @tz: thermal_zone_device
> * @trip: the trip point
> + * @crossed_up: whether or not the trip has been crossed on the way up
> *
> * Regulation Logic: a two point regulation, deliver cooling state depending
> * on the previous state shown in this diagram:
> @@ -90,26 +89,22 @@ static int thermal_zone_trip_update(stru
> * (trip_temp - hyst) so that the fan gets turned off again.
> *
> */
> -static int bang_bang_control(struct thermal_zone_device *tz,
> - const struct thermal_trip *trip)
> +static void bang_bang_control(struct thermal_zone_device *tz,
> + const struct thermal_trip *trip,
> + bool crossed_up)
> {
> struct thermal_instance *instance;
> - int ret;
>
> lockdep_assert_held(&tz->lock);
>
> - ret = thermal_zone_trip_update(tz, trip);
> - if (ret)
> - return ret;
> + thermal_zone_trip_update(tz, trip, crossed_up);
>
> list_for_each_entry(instance, &tz->thermal_instances, tz_node)
> thermal_cdev_update(instance->cdev);
> -
> - return 0;
> }
>
> static struct thermal_governor thermal_gov_bang_bang = {
> .name = "bang_bang",
> - .throttle = bang_bang_control,
> + .trip_crossed = bang_bang_control,
> };
> THERMAL_GOVERNOR_DECLARE(thermal_gov_bang_bang);
>
>
>

LGTM

Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>

\
 
 \ /
  Last update: 2024-04-19 11:34    [W:0.287 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site