lkml.org 
[lkml]   [2024]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 RESEND] net: hsr: Provide RedBox support
On Tue, Mar 26, 2024 at 10:02:20AM +0100, Lukasz Majewski wrote:
> Introduce RedBox support (HSR-SAN to be more precise) for HSR networks.
> Following traffic reduction optimizations have been implemented:
> - Do not send HSR supervisory frames to Port C (interlink)
> - Do not forward to HSR ring frames addressed to Port C
> - Do not forward to Port C frames from HSR ring
> - Do not send duplicate HSR frame to HSR ring when destination is Port C
>
> The corresponding patch to modify iptable2 sources has already been sent:
> https://lore.kernel.org/netdev/20240308145729.490863-1-lukma@denx.de/T/
>
> Testing procedure:
> ------------------
> The EVB-KSZ9477 has been used for testing on net-next branch
> (SHA1: 709776ea8562).
>
> Ports 4/5 were used for SW managed HSR (hsr1) as first hsr0 for ports 1/2
> (with HW offloading for ksz9477) was created. Port 3 has been used as
> interlink port (single USB-ETH dongle).
>
> Configuration - RedBox (EVB-KSZ9477):
> ifconfig lan1 down;ifconfig lan2 down
> ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
> ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 interlink lan3 supervision 45 version 1
> ifconfig lan4 up;ifconfig lan5 up
> ifconfig lan3 up
> ifconfig hsr1 192.168.0.11 up
>
> Configuration - DAN-H (EVB-KSZ9477):
>
> ifconfig lan1 down;ifconfig lan2 down
> ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
> ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 supervision 45 version 1
> ifconfig lan4 up;ifconfig lan5 up
> ifconfig hsr1 192.168.0.12 up
>
> This approach uses only SW based HSR devices (hsr1).
>
> -------------- ----------------- ------------
> DAN-H Port5 | <------> | Port5 | |
> Port4 | <------> | Port4 Port3 | <---> | PC
> | | (RedBox) | | (USB-ETH)
> EVB-KSZ9477 | | EVB-KSZ9477 | |
> -------------- ----------------- ------------
>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

Hi Lukasz,

this patch (2) seems to have a build dependency on:
(1) [v2,RESEND] net: hsr: Use full string description when opening HSR network device
https://lore.kernel.org/all/20240326085649.3259424-1-lukma@denx.de/

Which is pending review.

With this in mind, I suggest waiting for the review of 1 to be completed
and then either:

* If 1 is accepted, then follow-up by sending v4 of this patch (2); or
* If changes are requested to 1, include 1 and 2 together in
a patchset after addressing relevant feedback

..

\
 
 \ /
  Last update: 2024-05-27 16:13    [W:0.114 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site