lkml.org 
[lkml]   [2024]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] arm64: dts: ti: k3-j7200: Use exact ranges for FSS node
Date
The FSS bus contains several register ranges. Using an empty
ranges property works but causes a DT warning when we give
this node an address. Fix this by explicitly defining the
memory ranges in use.

Signed-off-by: Andrew Davis <afd@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 7cf21c99956e0..4fe39764ded40 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -520,10 +520,12 @@ mcu_spi2: spi@40320000 {

fss: bus@47000000 {
compatible = "simple-bus";
- reg = <0x00 0x47000000 0x00 0x100>;
#address-cells = <2>;
#size-cells = <2>;
- ranges;
+ ranges = <0x0 0x47000000 0x0 0x47000000 0x0 0x100>, /* FSS Control */
+ <0x0 0x47034000 0x0 0x47040000 0x0 0x100>, /* HBMC Control */
+ <0x0 0x47040000 0x0 0x47040000 0x0 0x100>, /* OSPI0 Control */
+ <0x5 0x00000000 0x5 0x00000000 0x1 0x0000000>; /* HBMC/OSPI0 Memory */

hbmc_mux: mux-controller@47000004 {
compatible = "reg-mux";
--
2.39.2

\
 
 \ /
  Last update: 2024-05-27 16:09    [W:0.158 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site