lkml.org 
[lkml]   [2024]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 4/5] ubifs: Introduce ACLs mount options
From
Date
在 2024/3/20 0:16, Li Zetao 写道:
> Implement the ability to enable or disable the ACLs feature through
> mount options. "-o acl" option means enable and "-o noacl" means disable
> and it is enable by default.
>
> Signed-off-by: Li Zetao <lizetao1@huawei.com>
> ---
> fs/ubifs/super.c | 40 ++++++++++++++++++++++++++++++++++++++++
> fs/ubifs/ubifs.h | 2 ++
> 2 files changed, 42 insertions(+)
>
> diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
> index 7f4031a15f4d..ed03bf11e51d 100644
> --- a/fs/ubifs/super.c
> +++ b/fs/ubifs/super.c
> @@ -457,6 +457,13 @@ static int ubifs_show_options(struct seq_file *s, struct dentry *root)
> seq_printf(s, ",assert=%s", ubifs_assert_action_name(c));
> seq_printf(s, ",ubi=%d,vol=%d", c->vi.ubi_num, c->vi.vol_id);
>
> +#ifdef CONFIG_UBIFS_FS_POSIX_ACL

This config is introduced in pacth 5, we cannot use it in patch 4.
> + if (c->mount_opts.acl == 2)
> + seq_puts(s, ",acl");
> + else if (c->mount_opts.acl == 1)
> + seq_puts(s, ",noacl");
> +#endif
> +
> return 0;
> }
>
> @@ -967,6 +974,8 @@ static int check_volume_empty(struct ubifs_info *c)
> * Opt_assert: set ubifs_assert() action
> * Opt_auth_key: The key name used for authentication
> * Opt_auth_hash_name: The hash type used for authentication
> + * Opt_acl: enable posix acl
> + * Opt_noacl: disable posix acl
> * Opt_err: just end of array marker
> */
> enum {
> @@ -981,6 +990,8 @@ enum {
> Opt_auth_key,
> Opt_auth_hash_name,
> Opt_ignore,
> + Opt_acl,
> + Opt_noacl,
It would be better to update Documentation/filesystems/ubifs.rst to
describe new mount options
> Opt_err,
> };
>
> @@ -997,6 +1008,8 @@ static const match_table_t tokens = {
> {Opt_ignore, "ubi=%s"},
> {Opt_ignore, "vol=%s"},
> {Opt_assert, "assert=%s"},
> + {Opt_acl, "acl"},
> + {Opt_noacl, "noacl"},
> {Opt_err, NULL},
> };
>
> @@ -1137,6 +1150,23 @@ static int ubifs_parse_options(struct ubifs_info *c, char *options,
> break;
> case Opt_ignore:
> break;
> +#ifdef CONFIG_UBIFS_FS_POSIX_ACL
> + case Opt_acl:
> + c->mount_opts.acl = 2;
> + c->vfs_sb->s_flags |= SB_POSIXACL;
> + break;
> + case Opt_noacl:
> + c->mount_opts.acl = 1;
> + c->vfs_sb->s_flags &= ~SB_POSIXACL;
> + break;
> +#else
> + case Opt_acl:
> + ubifs_err(c, "acl options not supported");
> + return -EINVAL;
> + case Opt_noacl:
> + ubifs_err(c, "noacl options not supported");
> + return -EINVAL;
> +#endif
> default:
> {
> unsigned long flag;
> @@ -2011,12 +2041,17 @@ static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data)
> sync_filesystem(sb);
> dbg_gen("old flags %#lx, new flags %#x", sb->s_flags, *flags);
>
> + c->mount_opts.acl = 0;
> err = ubifs_parse_options(c, data, 1);

1. mount -onoacl /dev/ubi0_0 /mnt # After that, mount will show 'noacl'
option
2. mount -oremount,xxx /dev/ubi0_0 /mnt
If 'xxx' has nothing to do with acl, c->mount_opts.acl is set as '0'.
Then superblock flag is assigned with 'SB_POSIXACL' and mount will not
display 'nocal'. Will it make user confused?
> if (err) {
> ubifs_err(c, "invalid or unknown remount parameter");
> return err;
> }
>
> +#ifdef CONFIG_UBIFS_FS_POSIX_ACL
> + if (!c->mount_opts.acl)
> + c->vfs_sb->s_flags |= SB_POSIXACL;
> +#endif
> if (c->ro_mount && !(*flags & SB_RDONLY)) {
> if (c->ro_error) {
> ubifs_msg(c, "cannot re-mount R/W due to prior errors");
> @@ -2197,6 +2232,11 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent)
> if (err)
> goto out_close;
>
> +#ifdef CONFIG_UBIFS_FS_POSIX_ACL
> + if (!c->mount_opts.acl)
> + c->vfs_sb->s_flags |= SB_POSIXACL;
> +#endif
> +
> /*
> * UBIFS provides 'backing_dev_info' in order to disable read-ahead. For
> * UBIFS, I/O is not deferred, it is done immediately in read_folio,
> diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
> index b0d3b076290d..4a6078cbb2f5 100644
> --- a/fs/ubifs/ubifs.h
> +++ b/fs/ubifs/ubifs.h
> @@ -956,6 +956,7 @@ struct ubifs_orphan {
> * specified in @compr_type)
> * @compr_type: compressor type to override the superblock compressor with
> * (%UBIFS_COMPR_NONE, etc)
> + * @acl: enable/disable posix acl (%0 default, %1 disable, %2 enable)
> */
> struct ubifs_mount_opts {
> unsigned int unmount_mode:2;
> @@ -963,6 +964,7 @@ struct ubifs_mount_opts {
> unsigned int chk_data_crc:2;
> unsigned int override_compr:1;
> unsigned int compr_type:2;
> + unsigned int acl:2;
> };
>
> /**
>


\
 
 \ /
  Last update: 2024-05-27 15:57    [W:0.124 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site