Messages in this thread Patch in this message | ![/](/images/icornerl.gif) | | From | Tudor Ambarus <> | Subject | [PATCH 12/12] spi: s3c64xx: switch exynos850 to new port config data | Date | Thu, 8 Feb 2024 13:50:45 +0000 |
| |
Exynos850 has the same version of USI SPI (v2.1) as GS101. Drop the fifo_lvl_mask and rx_lvl_offset and switch to the new port config data.
Backward compatibility with DT is not broken because when alises are set: - the SPI core will set the bus number according to the alias ID - the FIFO depth is always the same size for exynos850 (64 bytes) no matter the alias ID number.
Advantages of the change: - drop dependency on the OF alias ID. - FIFO depth is inferred from the compatible. Exynos850 integrates 3 SPI IPs, all with 64 bytes FIFO depths. - use full mask for SPI_STATUS.{RX, TX}_FIFO_LVL fields. Using partial masks is misleading and can hide problems of the driver logic.
Just compiled tested.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> --- drivers/spi/spi-s3c64xx.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 784786407d2e..9fcbe040cb2f 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1576,10 +1576,9 @@ static const struct s3c64xx_spi_port_config exynos5433_spi_port_config = { }; static const struct s3c64xx_spi_port_config exynos850_spi_port_config = { - /* fifo_lvl_mask is deprecated. Use {rx, tx}_fifomask instead. */ - .fifo_lvl_mask = { 0x7f, 0x7f, 0x7f }, - /* rx_lvl_offset is deprecated. Use {rx, tx}_fifomask instead. */ - .rx_lvl_offset = 15, + .fifo_depth = 64, + .rx_fifomask = S3C64XX_SPI_ST_RX_FIFO_RDY_V2, + .tx_fifomask = S3C64XX_SPI_ST_TX_FIFO_RDY_V2, .tx_st_done = 25, .clk_div = 4, .high_speed = true, -- 2.43.0.687.g38aa6559b0-goog
| ![\](/images/icornerr.gif) |