lkml.org 
[lkml]   [2024]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v14 00/53] Introduce QC USB SND audio offloading support
From
Hi Mark/Takashi,

On 2/8/2024 3:13 PM, Wesley Cheng wrote:
<snip>

Would it be possible to see if we could start pulling some of these non
offloading dependent changes into your repos? It would really be
helpful since the # of patches is getting a little cumbersome to
maintain. If we need to make any follow ups, I can address them as a
separate patch and add it to the series w/ the other changes that are
still pending.

> Mathias Nyman (13):
> xhci: fix possible null pointer dereference at secondary interrupter
> removal
> xhci: fix off by one check when adding a secondary interrupter.
> xhci: Add interrupt pending autoclear flag to each interrupter
> xhci: Add helper to set an interrupters interrupt moderation interval
> xhci: make isoc_bei_interval variable interrupter specific.
> xhci: remove unnecessary event_ring_deq parameter from
> xhci_handle_event()
> xhci: update event ring dequeue pointer position to controller
> correctly
> xhci: move event processing for one interrupter to a separate function
> xhci: add helper that checks for unhandled events on a event ring
> xhci: Don't check if the event ring is valid before every event TRB
> xhci: Decouple handling an event from checking for unhandled events
> xhci: add helper to stop endpoint and wait for completion
> xhci: sideband: add initial api to register a sideband entity
>

Will work with Mathias on the XHCI stuff when he gets some time to
review the set of changes added for the XHCI interrupters. Some of the
series in USB SND are dependent on that, such as the qc_audio_offload
driver, since it makes calls into the XHCI sideband that was added, so
won't be able to pull that in yet. (This is the only driver that will
interact w/ XHCI sideband, all ASoC and general USB SND changes are
independent)

Thanks
Wesley Cheng

> Wesley Cheng (40):
> usb: host: xhci: Export enable and disable interrupter APIs
> usb: host: xhci: Repurpose event handler for skipping interrupter
> events
> xhci: export XHCI IMOD setting helper for interrupters
> usb: host: xhci-sideband: Expose a sideband interrupter enable API
> usb: host: xhci-mem: Cleanup pending secondary event ring events
> usb: host: xhci-mem: Allow for interrupter clients to choose specific
> index
> ASoC: Add SOC USB APIs for adding an USB backend
> ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
> ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
> ASoC: qdsp6: q6afe: Increase APR timeout > ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6> ALSA:
usb-audio: Introduce USB SND platform op callbacks
> ALSA: usb-audio: Export USB SND APIs for modules
> ALSA: usb-audio: Save UAC sample size information
> usb: dwc3: Specify maximum number of XHCI interrupters
> usb: host: xhci-plat: Set XHCI max interrupters if property is present
> ALSA: usb-audio: qcom: Add USB QMI definitions
> ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
> ALSA: usb-audio: Check for support for requested audio format
> ASoC: usb: Add PCM format check API for USB backend
> ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device
> ALSA: usb-audio: Prevent starting of audio stream if in use
> ALSA: usb-audio: Do not allow USB offload path if PCM device is in use
> ASoC: dt-bindings: Add Q6USB backend
> ASoC: dt-bindings: Update example for enabling USB offload on SM8250
> ALSA: usb-audio: qcom: Populate PCM and USB chip information
> ASoC: qcom: qdsp6: Add support to track available USB PCM devices
> ASoC: Introduce SND kcontrols to select sound card and PCM device
> ASoC: qcom: qdsp6: Add SOC USB offload select get/put callbacks
> ASoC: Add SND kcontrol for fetching USB offload status
> ASoC: qcom: qdsp6: Add PCM ops to track current state
> ASoC: usb: Create SOC USB SND jack kcontrol
> ASoC: qcom: qdsp6: Add headphone jack for offload connection status
> ASoC: usb: Fetch ASoC sound card information
> ALSA: usb-audio: mixer: Add USB offloading mixer control
> ALSA: usb-audio: qcom: Use card and PCM index from QMI request
> ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
> ASoC: usb: Rediscover USB SND devices on USB port add
> ASoC: qcom: Populate SoC components string
> ASoC: doc: Add documentation for SOC USB
>
> .../devicetree/bindings/sound/qcom,q6usb.yaml | 55 +
> .../bindings/sound/qcom,sm8250.yaml | 15 +
> Documentation/sound/soc/index.rst | 1 +
> Documentation/sound/soc/usb.rst | 611 ++++++
> drivers/usb/dwc3/core.c | 12 +
> drivers/usb/dwc3/core.h | 2 +
> drivers/usb/dwc3/host.c | 5 +-
> drivers/usb/host/Kconfig | 9 +
> drivers/usb/host/Makefile | 2 +
> drivers/usb/host/xhci-mem.c | 53 +-
> drivers/usb/host/xhci-plat.c | 2 +
> drivers/usb/host/xhci-ring.c | 240 ++-
> drivers/usb/host/xhci-sideband.c | 439 ++++
> drivers/usb/host/xhci.c | 97 +-
> drivers/usb/host/xhci.h | 21 +-
> .../sound/qcom,q6dsp-lpass-ports.h | 1 +
> include/linux/usb/xhci-sideband.h | 70 +
> include/sound/q6usboffload.h | 20 +
> include/sound/soc-usb.h | 90 +
> sound/soc/Makefile | 2 +-
> sound/soc/qcom/Kconfig | 4 +
> sound/soc/qcom/common.c | 41 +
> sound/soc/qcom/common.h | 4 +-
> sound/soc/qcom/qdsp6/Makefile | 1 +
> sound/soc/qcom/qdsp6/q6afe-dai.c | 60 +
> sound/soc/qcom/qdsp6/q6afe.c | 193 +-
> sound/soc/qcom/qdsp6/q6afe.h | 36 +-
> sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 23 +
> sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 1 +
> sound/soc/qcom/qdsp6/q6routing.c | 9 +
> sound/soc/qcom/qdsp6/q6usb.c | 401 ++++
> sound/soc/qcom/sm8250.c | 14 +-
> sound/soc/soc-usb.c | 538 +++++
> sound/usb/Kconfig | 19 +
> sound/usb/Makefile | 3 +-
> sound/usb/card.c | 109 +
> sound/usb/card.h | 24 +
> sound/usb/endpoint.c | 1 +
> sound/usb/format.c | 1 +
> sound/usb/helper.c | 1 +
> sound/usb/mixer.c | 5 +
> sound/usb/mixer_usb_offload.c | 72 +
> sound/usb/mixer_usb_offload.h | 17 +
> sound/usb/pcm.c | 104 +-
> sound/usb/pcm.h | 11 +
> sound/usb/qcom/Makefile | 2 +
> sound/usb/qcom/qc_audio_offload.c | 1910 +++++++++++++++++
> sound/usb/qcom/usb_audio_qmi_v01.c | 892 ++++++++
> sound/usb/qcom/usb_audio_qmi_v01.h | 162 ++
> 49 files changed, 6228 insertions(+), 177 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6usb.yaml
> create mode 100644 Documentation/sound/soc/usb.rst
> create mode 100644 drivers/usb/host/xhci-sideband.c
> create mode 100644 include/linux/usb/xhci-sideband.h
> create mode 100644 include/sound/q6usboffload.h
> create mode 100644 include/sound/soc-usb.h
> create mode 100644 sound/soc/qcom/qdsp6/q6usb.c
> create mode 100644 sound/soc/soc-usb.c
> create mode 100644 sound/usb/mixer_usb_offload.c
> create mode 100644 sound/usb/mixer_usb_offload.h
> create mode 100644 sound/usb/qcom/Makefile
> create mode 100644 sound/usb/qcom/qc_audio_offload.c
> create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.c
> create mode 100644 sound/usb/qcom/usb_audio_qmi_v01.h
>

\
 
 \ /
  Last update: 2024-05-27 14:55    [W:1.316 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site