lkml.org 
[lkml]   [2024]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 0/8] regulator: mp8859: Cleanups and enhancements
From
Hi Mark,

Am 25.02.24 um 15:59 schrieb Mark Brown:
> I had cause to look at the MP8859 driver together with the datasheet and
> noticed a few small issues and missing features. This series deals with
> many of these issues, the device also has support for interrupts which
> are not implemented here.
>
> Signed-off-by: Mark Brown <broonie@kernel.org>
> ---
> Mark Brown (8):
> regulator: mp8859: Specify register accessibility and enable caching
> regulator: mp8859: Validate and log device identifier information
> regulator: mp8859: Support enable control
> regulator: mp8859: Support mode operations
> regulator: mp8859: Support active discharge control
> regulator: mp8859: Support status and error readback
> regulator: mp8859: Report slew rate
> regulator: mp8859: Implement set_current_limit()
>
> drivers/regulator/mp8859.c | 252 ++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 251 insertions(+), 1 deletion(-)
> ---
> base-commit: b401b621758e46812da61fa58a67c3fd8d91de0d
> change-id: 20240224-regulator-mp8859-eebd7c16c374
>
> Best regards,
Tested on rk3399-roc-pc.

Tested-by: Markus Reichl <m.reichl@fivetechno.de>

Gruß,
--
Markus Reichl


\
 
 \ /
  Last update: 2024-05-27 15:21    [W:0.100 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site