lkml.org 
[lkml]   [2024]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/5] memory: stm32-fmc2-ebi: add MP25 support
From
Hi Krzysztof,

On 2/21/24 09:32, Krzysztof Kozlowski wrote:
> On 19/02/2024 15:02, Christophe Kerello wrote:
>> Add the support of the revision 2 of FMC2 IP.
>> - PCSCNTR register has been removed,
>> - CFGR register has been added,
>> - the bit used to enable the IP has moved from BCR1 to CFGR,
>> - the timeout for CEx deassertion has moved from PCSCNTR to BCRx,
>> - the continuous clock enable has moved from BCR1 to CFGR,
>> - the clk divide ratio has moved from BCR1 to CFGR.
>>
>> The MP1 SoCs have only one signal to manage all the controllers (NWAIT).
>> The MP25 SOC has one RNB signal for the NAND controller and one NWAIT
>> signal for the memory controller.
>>
>> Let's use a platform data structure for parameters that will differ
>> between MP1 and MP25.
>
>
> ...
>
>> +
>> ebi->regmap = device_node_to_regmap(dev->of_node);
>> if (IS_ERR(ebi->regmap))
>> return PTR_ERR(ebi->regmap);
>> @@ -1190,9 +1502,11 @@ static int stm32_fmc2_ebi_probe(struct platform_device *pdev)
>> if (ret)
>> goto err_release;
>>
>> - ret = stm32_fmc2_ebi_save_setup(ebi);
>> - if (ret)
>> - goto err_release;
>> + if (ebi->data->save_setup) {
>
> This cannot be NULL.

Ok, it will be done in V3.

Regards,
Christophe Kerello.

>
>> + ret = ebi->data->save_setup(ebi);
>> + if (ret)
>> + goto err_release;
>> + }
>>
>> platform_set_drvdata(pdev, ebi);
>>
>> @@ -1238,7 +1552,9 @@ static int __maybe_unused stm32_fmc2_ebi_resume(struct device *dev)
>> if (ret)
>> return ret;
>>
>> - stm32_fmc2_ebi_set_setup(ebi);
>> + if (ebi->data->set_setup)
>
> This cannot be NULL.
>
>
>
> Best regards,
> Krzysztof
>

\
 
 \ /
  Last update: 2024-05-27 15:21    [W:0.117 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site