lkml.org 
[lkml]   [2024]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] filemap: avoid unnecessary major faults in filemap_fault()
From
On 26.02.24 08:52, Huang, Ying wrote:
> "zhangpeng (AS)" <zhangpeng362@huawei.com> writes:
>
>> On 2024/2/26 14:04, Huang, Ying wrote:
>>
>>> "zhangpeng (AS)" <zhangpeng362@huawei.com> writes:
>>>
>>>> On 2024/2/7 10:21, Huang, Ying wrote:
>>>>
>>>>> Peng Zhang <zhangpeng362@huawei.com> writes:
>>>>>> From: ZhangPeng <zhangpeng362@huawei.com>
>>>>>>
>>>>>> The major fault occurred when using mlockall(MCL_CURRENT | MCL_FUTURE)
>>>>>> in application, which leading to an unexpected performance issue[1].
>>>>>>
>>>>>> This caused by temporarily cleared PTE during a read+clear/modify/write
>>>>>> update of the PTE, eg, do_numa_page()/change_pte_range().
>>>>>>
>>>>>> For the data segment of the user-mode program, the global variable area
>>>>>> is a private mapping. After the pagecache is loaded, the private anonymous
>>>>>> page is generated after the COW is triggered. Mlockall can lock COW pages
>>>>>> (anonymous pages), but the original file pages cannot be locked and may
>>>>>> be reclaimed. If the global variable (private anon page) is accessed when
>>>>>> vmf->pte is zeroed in numa fault, a file page fault will be triggered.
>>>>>>
>>>>>> At this time, the original private file page may have been reclaimed.
>>>>>> If the page cache is not available at this time, a major fault will be
>>>>>> triggered and the file will be read, causing additional overhead.
>>>>>>
>>>>>> Fix this by rechecking the PTE without acquiring PTL in filemap_fault()
>>>>>> before triggering a major fault.
>>>>>>
>>>>>> Testing file anonymous page read and write page fault performance in ext4
>>>>>> and ramdisk using will-it-scale[2] on a x86 physical machine. The data
>>>>>> is the average change compared with the mainline after the patch is
>>>>>> applied. The test results are within the range of fluctuation, and there
>>>>>> is no obvious difference. The test results are as follows:
>>>>> You still claim that there's no difference in the test results. If so,
>>>>> why do you implement the patch? IMHO, you need to prove your patch can
>>>>> improve the performance in some cases.
>>>> I'm sorry that maybe I didn't express myself clearly.
>>>>
>>>> The purpose of this patch is to fix the issue that major fault may still be triggered
>>>> with mlockall(), thereby improving a little performance. This patch is more of a bugfix
>>>> than a performance improvement patch.
>>>>
>>>> This issue affects our traffic analysis service. The inbound traffic is heavy. If a major
>>>> fault occurs, the I/O schedule is triggered and the original I/O is suspended. Generally,
>>>> the I/O schedule is 0.7 ms. If other applications are operating disks, the system needs
>>>> to wait for more than 10 ms. However, the inbound traffic is heavy and the NIC buffer is
>>>> small. As a result, packet loss occurs. The traffic analysis service can't tolerate packet
>>>> loss.
>>>>
>>>> To prevent packet loss, we use the mlockall() function to prevent I/O. It is unreasonable
>>>> that major faults will still be triggered after mlockall() is used.
>>>>
>>>> In our service test environment, the baseline is 7 major faults/12 hours. After applied the
>>>> unlock patch, the probability of triggering the major fault is 1 major faults/12 hours. After
>>>> applied the lock patch, no major fault will be triggered. So only the locked patch can actually
>>>> solve our problem.
>>> This is the data I asked for.
>>>
>>> But, you said that this is a feature bug fix instead of performance
>>> improvement. So, I checked the mlock(2), and found the following words,
>>>
>>> "
>>> mlockall() locks all pages mapped into the address space of the calling
>>> process. This includes the pages of the code, data, and stack segment,
>>> as well as shared libraries, user space kernel data, shared memory, and
>>> memory-mapped files. All mapped pages are guaranteed to be resident in
>>> RAM when the call returns successfully; the pages are guaranteed to
>>> stay in RAM until later unlocked.
>>> "
>>>
>>> In theory, the locked page are in RAM. So, IIUC, we don't violate the
>>> ABI. But, in effect, we does do that.
>>
>> "mlockall() locks all pages mapped into the address space of the calling process."
>> For a private mapping, mlockall() can lock COW pages (anonymous pages), but the
>> original file pages can't be locked. Maybe, we violate the ABI here.
>
> If so, please make it explicit and loudly.
>
>> This is also
>> the cause of this issue. The patch fix the impact of this issue: prevent major
>> faults, reduce IO, and fix the service packet loss issue.
>>
>> Preventing major faults, and thus reducing IO, could be an important reason to use
>> mlockall(). Could we fix this with the locked patch? Or is there another way?
>
> Unfortunately, locked patch cause performance regressions for more
> common cases. Is it possible for us to change ptep_modify_prot_start()
> to use some magic PTE value instead of 0? That may be possible. But,
> that isn't enough, you need to change all ptep_get_and_clear() users.

Trigger (false) major faults for mlocked memory is suboptimal.

Having such pages temporarily not mapped (e.g., page migration) is
acceptable (pages are in RAM but are getting moved). We handle that
using nonswap migration entries.

Let me understand the issue first:

1) MAP_PRIVATE file mapping that is mlocked.

2) We caused COW, so we now have an anonymous page mapped. That anon
page is mlocked.

3) Change of protection (under PT lock) will temporarily clear the PTE

4) Page fault will trigger and find the PTE still cleared (without PT
lock)

5) We don't realize that there is a page mapped and, therefore, trigger
a major fault.

Using the PT lock would fix it properly. Doing it as in this patch can
only be considered an optimization, not a proper fix.

Using a magic PTE to work around "just use the PT lock like everyone
else" feels a bit odd. The patch states "We don't hold PTL here as
acquiring PTL hurts performance" -- do we have any numbers on that?

We could special-case that for MLOCK'ed VMAs with MCL_FUTURE, meaning,
take the PTL to double-check only in such VMAs.

--
Cheers,

David / dhildenb


\
 
 \ /
  Last update: 2024-05-27 15:21    [W:0.131 / U:0.916 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site